Manual Pioneer PDP-4280XA (page 18 of 362) (English, German, Dutch, French, Italian, Spanish)

57845

Zoom out

Zoom in

1/362

Preparation05

Attaching and removing speed clamps

Insert [1] into an appropriate hole on the rear of the plasma

television and snap [2] into the back of [1] to lock the clamp.

• Speed clamps are designed to be difficult to undo once in place.

Please attach them carefully.

• Use pliers to twist the clamp 90º, pulling outward. The clamp

may deteriorate over time and become damaged if removed.

• Be careful not to subject any connecting cables to strain.

Note

• Use the speed clamps as necessary.

Attaching the ferrite core

Attach the accessory ferrite core to the end of the power cord as

shown in the accompanying illustration. Use the provided cable tie

to prevent the ferrite core from slipping on the table.

If you do not do this, the plasma television will not conform to

mandatory CE standards.

Connecting the power cord

Note

• Disconnect the power cord from the power outlet when the

plasma television is not going to be used for a long period of

time.

• Insert the power plug in the AC outlet, after all other

components are connected.

Ferrite core

Cable tie

AC power cord

To power outlet

As close as possible

Europe, except UK and

Republic of Ireland

UK and Republic of Ireland

Power cord

Rear view

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDP-4280XA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 17,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer PDP-4280XA Manual

Product: