161483

Pioneer pd-m406 Manual

19
Zoom out
Zoom in
Previous page
1/88
Next page
19
En/Fr
1
2
PROGRAM
DISC
PROGRAM PLAYBACK - TO PROGRAM
TRACKS/DISCS IN DESIRED ORDER
1. Avec le lecteur arrêté, appuyez sur la touche de
programme (PROGRAM) pour que l’indicateur
PROGRAM s’allume.
2. Utilisez la touche DISC ou l’une des touches de
numéro du disque désiré.
Le numéro du disque sélectionné sera affiché.
3. Ensuite, appuyez sur la touche 41 ou ¡
¢ pour sélectionnée sera affiché.
4. Finalement,appuyez sur la touche de programme
(PROGRAM) ou attendez environ deux secondes;
le programme sera mémorisé.
Si la touche de programme (PROGRAM) est enfoncée
après la sélection du numéro de disque seul, l’indicateur “AL”
apparaît,indiquant la sélection du mode “Disc All Program”
(tout le contenu du disque est entré dans le programme
comme une étape unique).
Toutefois, pendant que l’indicateur “AL“ est allumé,si la
touche 41 ou ¡¢ est utilisée pour désigner un
numéro de piste et que la touche de programme
(PROGRAM) est alors enfoncée (ou aprés deux secondes), la
piste sélectionnée sera mémorisée comme cette étape de
programme.
5. Répéter les étapes 2,3 et 4 pour les autres pistes
à programmer.
6. Appuyer sur la touche 6.
Les pistes sont lues dans l’ordre programmé. Quand toutes
les pistes programmèes ont été lues, le lecteur entre en mode
d’arrêt.
REMARQUE:
Au moment où une plage musicale est choisie au moyen des
touches
4
1
ou
¡
¢
, au cours de l’étape 3, le numéro
de la plage affiché fait automatiquement partie du programme
si on n’appuie pas sur les touches
4
1
ou
¡
¢
dans
les 2 secondes qui suivent. En conséquence, ne pas oublier
d‘appuyer sur les touches
4
1
ou
¡
¢
jusqu’ à ce que
le muméro de la plage musicale que l‘on désire écouter
s‘affiche.
DISC 1
DISC 2 DISC 3
DISC 4 DISC 5
DISC NUMBER
PD-M426A only
PD-M426A seulement
PGM
PD-M426A only
PD-M426A seulement
TO PLAY ONLY DESIRED
TRACKS/DISCS
POUR LIRE UNIQUEMENT LES
PISTES/DISQUES VOULUS
1. With the player stopped, press the PROGRAM
button, so that the PROGRAM indicator lights.
2. Use the DISC button or one of the DISC NUMBER
buttons to select the desired disc number.
The selected disc number will be displayed.
3. Then, press the 41 or ¡¢ button to
select the desired track.
The selected track number will be displayed.
4. Finally press the PROGRAM button, or wait for
about two seconds; the program will be stored in
memory.
If the PROGRAM button is pressed after selecting only
the disc number, the “AL” indicator will appear, indicating
selection of the “Disc All Program” mode (the entire
contents of the disc is entered into the program as a single
step). While the “AL” indicator is displayed, however, if
the 41 or ¡¢ button is used to designate a track
number and the PROGRAM button is then pressed (or
after two seconds elapses), the selected track will be
stored as that program step.
5. Repeat steps 2, 3 and 4 to program other tracks.
6. Press the 6 button.
The tracks are played in the programmed order. When all
programmed tracks have been played, the player enters
stop mode.
NOTE:
When a track is selected with the
4
1
or
¡
¢
button in step 3, the displayed track No. is automatically
programmed if the
4
1
or
¡
¢
button is not pressed
within 2 seconds. Therefore, be sure to press the
4
1
or
¡
¢
button sequentially until the desired track No.
appears on the display.
3
26
1,4
DISC 6
'
0
7
6
Î
41 ¢¡
6
LECTURE PROGRAMMEE - POU RPROGRAMMER
LES PISTES/DISQUES DANS UN ORDRE VOULU
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer pd-m406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer pd-m406 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info