Manual Pioneer PD-50-K (page 9 of 116) (English, German, Dutch, French, Italian, Spanish, Norwegian)

491902

Zoom out

Zoom in

1/116

Playback 04

English

DeutschFrançais

Nederlands

Italiano Español Русский

Chapter 4:

Playback

The functions that can be used differ according to the

type of disc and file. In some cases, some of the

functions cannot be used. See Playback functions on

page 13.

Playing discs

1 Press the front panel’s

/I STANDBY/ON

button to turn

power ON to the unit.

• Turn on the power by pressing the

/I STANDBY/ON button so that it

remains at the depressed position.

Side view of front panel

2 Press the



button to open

the disc tray and set the disc in

place.

• Set the disc with the imprinted side facing up.

3 Press the



button to begin

playback.

• To pause playback, press the  button.

• To stop playback, press the  button.

Note

• Steps 2 and 3 can be performed via the remote

control in the same way as for the main unit’s front

panel controls.

Set the power to Standby

Remove any disc loaded before setting the power switch

to STANDBY mode.

• Press the remote control’s

 STANDBY/ON

button.

The next time you wish to turn on the power,

press the remote control’s  STANDBY/ON button.

• Pressing the front panel /I STANDBY/ON button

sets the unit to power OFF, not STANDBY mode. To

turn on the power again, press the front panel’s

/I STANDBY/ON button.

Note

• If the power cord is disconnected when the unit is

in the standby mode the unit will turn off, but when

the cord is then reconnected, the unit will not

automatically turn on. After reconnecting the

power cord, press the remote control’s

 STANDBY/ON button to turn the power on.

Fast forward/Fast reverse

• During playback, press the





button.

Each time the button is pressed the forward or reverse

speed is changed in four steps.

• To return to the normal play function, press the

 button.

Skip function

• During playback, press the





button.

Playback will skip ahead or backwards the number of

tracks corresponding to the times the button is pressed.

Direct search (designate a specific track

for playback)

• Using the number buttons,

input the desired track number,

then press the ENTER button to

confirm the selection.

Even if the ENTER button is not pressed,

playback will begin automatically after a 5-second

interval (this does not apply to programmed playback).

Repeat playback

Repeat play can be performed for the currently playing

single track, or for all tracks on the entire disc.

• During playback, press the

REPEAT button.

• Repeat play will begin, and the [REPEAT]

indicator will light on the unit’s front panel display.

Press the button again to alternate the type of

repeat play between single-track repeat and disc

(all-track) repeat as follows:

Note

• The repeat play function is canceled when disc

playback is stopped.

Random playback

All tracks on the disc are selected and played in random

order, until each track has been played once.

• During playback, press the

RANDOM

button.

Random playback starts, and the [RANDOM]

lights in the main unit's front panel display.

Note

• Random playback continues until the disc stops, or

until the RANDOM button is pressed once again.

• The random playback function cannot be used

simultaneously with programmed playback.

•If the  button is pressed during random

playback, play skips ahead to the next randomly

selected track. If the  button is pressed,

playback returns to the beginning of the currently

playing track and starts again.

Programmed playback (Play tracks in a

predetermined order)

This function allows you to program up to 24 tracks for

playback in the order selected.

1 From the stop mode, press the

PROGRAM

button.

The [PGM] indicator will light in the unit’s front panel

display.

2 Use the number buttons to

select the number of the desired

track, followed by the

ENTER

button.

Example: To select track 15, press the 1 and 5 buttons,

then press ENTER. In the event you make a mistake,

press the CLEAR button.

3 Repeat step 2 to input the numbers of all

desired tracks.

4 Press the



button.

Playback will begin in the order the tracks have

been programmed. If you wish to add other

tracks, repeat steps 1 and 2.

Note

•If the CLEAR button is pressed when the disc is

stopped, all programmed tracks will be cancelled.

• To clear programmed tracks, from the stop mode,

press the PROGRAM button followed by the CLEAR

button. The programmed tracks will be cancelled,

beginning with the last one programmed.

• A “pause” cannot be programmed.

• The contents of programmed playback (all-track

repeat) can be repeated. Just press the REPEAT

button after beginning programmed playback (see

at left).

• Single-track repeat cannot be performed during

programmed playback.

• Random playback cannot be used during

programmed playback.

•If the  button is pressed during programmed

playback, play will jump ahead to begin playback of

the next programmed track.

• After playback has stopped, to begin the same

programmed playback again, press the PROGRAM

button, followed by the  button.

トラックリピート([REPEAT]点灯)

↓

ディスクリピート([REPEAT]、[ALL]点灯)

↓

リピートオフ

single-track repeat

([REPEAT] indicator lights)

Disc repeat ([REPEAT] and [ALL] indicators light)

Repeat OFF

∼

0 9

ENTER

REPEAT

RANDOM

PROGRAM

∼

0 9

ENTER

PD-50_PWSYXZT8.book 9 ページ２０１２年７月６日　金曜日　午前１１時１２分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PD-50-K in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 24,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer PD-50-K Manual

Product: