698560
4
Zoom out
Zoom in
Previous page
1/6
Next page
CYR1207-A < 13 > CYR1207-A < 14 > CYR1207-A < 15 > CYR1207-A < 16 >
Inserting and Ejecting the microSD Card
Turn off the power to this product when inserting and removing the microSD card.
microSD Card Slot
Inserting the microSD Card
Hold the top edge of the microSD card, position the microSD card so that the label is facing the backside of this
product, and slowly insert it into the microSD card slot until it clicks.
Ejecting the microSD Card
Slowly push in the top edge of the microSD card until it clicks. The lock will be released. Pull out the microSD card.
Playing Files on a PC
You can play the files on the microSD card with your PC by inserting the microSD card ejected from this product into
your PC, using the included SD Conversion Adapter if necessary.
Folder and File Structure
Event
(Event video file)
Parking
(Parking mode video file)
Photo
(Photo file)
Video
(Continuous video file)
EVEN******-******.MP4
EVEN******-******.NMEA
PARK******-******.MP4
PARK******-******.NMEA
IMG******-******.JPG
FILE******-******.MP4
FILE******-******.NMEA
DEVICE.XML
(System file)
Folder File
SD Conversion Adapter
(included)
microSD Card
Notes
The file name is automatically assigned a name using the year, month, day, hours, minutes, and seconds.
Files with the extension “.NMEA” are administration files.
Files can be played on your PC by connecting this product and PC with a commercially available USB cable.
This product does not support USB 3.0.
Using this product
Before using this product, first stop the vehicle in a safe location and apply the parking brake.
This product Power
This product starts when the vehicle’s engine is turned on (ACC ON), and it automatically starts recording. (Contin-
uous recording)
The recorded video is saved to the microSD card as one file of the set increment of time, and when the microSD
card runs out of free space, the files are overwritten starting from the oldest file.
CAUTION
This product may not start when the engine is started if the internal battery is discharged or insufficiently
charged.
Start this product with the following methods when it does not start.
Press the power button on this product.
Charge this product and let it sit for about three minutes. Then unplug the plug of the Cigarette Lighter
Power Cable from the cigarette power socket and plug it back in.
Notes
Continuous recording will stop under the following circumstances.
When the settings menu is displayed – During event recording
When the power supply is stopped – When parking mode has started
Manually Turning the Power On and Off
To manually turn this product power on and off, press and hold the
power button for two or more seconds.
System Indicator Display
The operating status of this product is displayed with the system indicator.
System Indicator Charging Continuous Recording
Event/Parking Mode
Recording
Illuminated green
Illuminated red
Illuminated amber
Check this product settings for the parking mode settings.
This product Settings”
Function Buttons
The functions of the function buttons are indicated by the icons displayed at the bottom of the screen.
The functions of the buttons will depend on the displayed screen.
Notes
The following restrictions will occur when the product detects that the vehicle is moving faster than
approx. 15 km/h. (Only when a GPS signal can be received.)
will be hidden.
The product switches to the recording state while the settings menu screen is displayed.
Recording
1
2 3 4
Power off
Display settings menu
Take photo
Record event
Status Display
The status display shows the operating status of this product.
18:16:23
Recording indicator
This icon flashes during recording.
Current time
The time displayed here is recorded as the event
recording time.
“System”-“Date/Time”
GPS reception status
The bars are green when receiving GPS signals.
GPS signals cannot be received when the bars
are white and a red × is displayed.
Recording screen
Event Recording
Automatic Recording by Detecting
Impacts (Event Recording)
The continuous video file when an impact was detected
by this product, such as an impact with another vehicle,
is saved to the “Event” folder as an event video file. The
number of event video files and the recording time will
depend on when the impact was detected.
When the impact was detected at the beginning
of the file
When the impact was detected within 10 seconds
of the start of the continuous video file, the current
file where the impact was detected and the previous
file (continuous video file 1 and 2 in the following
diagram) are saved as the event video file.
Continuous video file 2Continuous video file 1
Impact detected
Continuous video file 2
Start recording
Within 0 to 10 seconds
When the impact was detected at the end of the file
When the impact was detected in the 9 seconds
before the end of the continuous video file, the file
will be extended by 10 seconds of recording time
and saved as the event video file. If an impact was
detected during the extended period, a subsequent
video file will be added and saved as an event video
file. Video files will be repeatedly added while the
impact continues.
Continuous video
file 1
Impact
detected
Start recording
9 secondsbefore
end of video
Extended by
10 seconds
Continuous video
file 2
When the impact was detected at a time other
than the beginning or end of the file
Only the continuous video file when the impact was
detected is saved as the event video file.
Manual Recording (Manual Event
Recording)
Switch to event recording by pressing the
button
during continuous recording. The recorded video is
saved to the
“Event” folder as an event video file.
This
product returns to continuous recording when event
recording ends.
Notes
Stop event recording by pressing the
button
during event recording.
The recording time can be set with
“Video Clip
Length”
.
Video Recording” - “Video Clip Length”
You can also adjust the sensitivity for detecting
impacts.
“Video Recording” - “G-Sensor Sensitivity”
Parking Mode
Parking mode operates for a maximum of approximately
50 minutes after the power supplied to this product
stops (the engine is turned off or the cigarette power
cable is unplugged). If this product detects vibration
or the movement of people/vehicles due to changes
in the image, 20 seconds of video is recorded after the
detected event.
Notes
To use parking mode, under “Parking Mode”, set
“Parking Mode” to ON.
“Parking Mode” - “Parking Mode”
You can adjust the sensitivity for detecting vibration.
“Parking Mode” - “G-Sensor Sensitivity”
You can adjust the sensitivity for detecting the
movement of people and vehicles.
“Parking Mode” - “Motion Detection
Settings menu
5
6 7 8
Back
Next settings screen
Previous settings screen
Confirm
Notes
The following restrictions will occur when the product detects that the vehicle is moving faster than
approx. 15 km/h. (Only when a GPS signal can be received.)
If the monitor display is set to [Always On], the recording screen and
will be hidden.
When the screen is off, the screen can be displayed by pressing any button.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer ND-DVR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer ND-DVR100 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer ND-DVR100

Pioneer ND-DVR100 User Manual - German - 12 pages

Pioneer ND-DVR100 User Manual - Dutch - 6 pages

Pioneer ND-DVR100 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info