611810
51
Zoom out
Zoom in
Previous page
1/54
Next page
51
13
13
Additional information (Stereo receiver: SX-P01, SX-P01DAB)
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorized PIONEER dealer or service
centre.
General
The clock is not set to the correct time.
Did a power failure occur?
Reset the clock. (page 44)
When a button is pressed, the unit does not respond.
Have you correctly selected the stereo receiver or CD player
using the CONTROL RCV or CONTROL CD button on the
remote control before using the function button?
Set the unit to the power stand-by mode and then turn it back
on.
If the unit still malfunctions, reset it. (page 51)
No sound is heard.
Is the volume level set to “Min”?
Is the volume muted?
Are the headphones connected?
Are the speaker wires disconnected?
Remote control
The remote control does not operate.
Is the AC power lead of the unit plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor receive strong light?
Tuner
The radio makes unusual noises continuously.
Is the unit placed near the TV or computer?
Is the FM wire antenna placed properly? Move the wire antenna
away from the AC power lead if it is located nearby.
DAB
DAB reception is poor.
Check the connections, and adjust the location and position of
wire antenna. After that, execute Auto Scan function manually.
(page 49)
If the reception environment changed by removal, etc., execute
Auto Scan function manually. (page 49)
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. Wipe off any
condensation on the transmitter with a soft cloth before
operating the unit.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal
supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power
on again.
2
If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note
If neither operation above restores the unit, clear all the
memory by resetting it.
Factory reset, clearing all memory
1
Turn on the unit.
Refer to To turn the power on on page 44 for details.
2
Select the stereo receiver by pressing the CONTROL RCV
button on the remote control.
3
Press the SETUP button.
4
Press the
/
button to select ‘Factory Reset’.
5
Press the ENTER button.
6
Press the
/
button to select ‘RESET OK?’.
7
Press the ENTER button.
The stereo receiver is restarted automatically.
CAUTION
• This operation will erase all data stored in memory
including clock, timer settings, tuner preset.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
CAUTION
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer N-P01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer N-P01 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer N-P01

Pioneer N-P01 Quick start guide - English, German - 36 pages

Pioneer N-P01 User Manual - German - 54 pages

Pioneer N-P01 Quick start guide - Dutch - 36 pages

Pioneer N-P01 User Manual - Dutch - 54 pages

Pioneer N-P01 Quick start guide - French - 36 pages

Pioneer N-P01 User Manual - French - 54 pages

Pioneer N-P01 Quick start guide - Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info