491907
18
Zoom out
Zoom in
Previous page
1/28
Next page
Using other functions08
18
En
Chapter 8:
Using other functions
Using the Sound mode
N-50 only:
This function allows you to utilize various sound modes
during playback.
This function cannot be used when the PURE
AUDIO mode is on.
This function is effective only when playing analog
audio.
1 Press
SOUND
to show the Sound option
menu.
2Use
/
to select the setting, then
press
ENTER
.
3Use
/
to select
On
or
Off
, then press
ENTER
.
The factory default settings are Off.
For greatest fidelity to the original
sound
N-50 only:
The PURE AUDIO mode allows audio signals to be
played via the shortest playback circuit without passing
through the DSP, thus reducing noise and producing
playback sound with greatest fidelity to the original.
1 Press
PURE AUDIO
to switch the Pure
Audio mode on or off.
Using the D/A converter
N-50 only:
Digital signals input to the rear-panel DIGITAL IN or
DIGITAL IN USB connectors are converted to analog
signals and output from the ANALOG OUT connectors.
Playing music from a digital audio
component
Outputs digital signals input to the DIGITAL IN
(COAXIAL or OPTICAL) connectors.
1 Make a digital input connection.
See Digital audio input connections on page 6.
2 Press
DIG IN 1
or
DIG IN 2
to select
Digital In 1
or
Digital In 2
as the input
source.
You can also perform the same operation by pressing the
FUNCTION on the front panel repeatedly.
When Digital In 1 is selected, digital input signals from
the COAXIAL connector are played; when Digital In 2 is
selected, digital input signals from the OPTICAL
connector are played.
Note
Digital signal formats that can be input to this unit
include linear PCM signals with sampling rates and
quantitative bits up to 192 kHz/24 bits (Depending
on the connected device and environment,
operation may not be successful).
Settings What it does
Auto
Sound
Retriever
With the
Auto Sound Retriever
function,
DSP processing is used to compensate for
the loss of audio data upon compression,
improving the sound
s sense of density and
modulation.
When On is selected, the
Auto Sound
Retriever
effect is optimized based on the
bitrate information of the contents input to
the
USB
,
Music Server
and
Internet Radio
to achieve high sound quality.
Auto Level
Control
In the Auto level control mode, this unit
equalizes playback sound levels.
Hi-bit 32
Creates a wider dynamic range with digital
sources. Smoother, more delicate musical
expression can be achieved by requantizing
16 bit to 24 bit audio signals to 32 bit.
Sound
Retriever
Air
Suitable for listening to the sound from a
Bluetooth wireless technology device. The
Sound Retriever Air
mode can only be
selected when the
BT Audio
or
Air Jam
input.
Playing music from a computer
Use this function to play digital audio input to the unit's
rear panel DIGITAL IN USB port.
1 Connect the unit to a computer via USB
cable
See Using a USB cable to connect to a computer on
page 7.
2 Press
DIG IN USB
select
Digital In USB
as
the input source.
You can also perform the same operation by pressing the
FUNCTION on the front panel repeatedly.
3 Begin playback on the computer.
Note
When using a USB cable to connect this unit to a
computer for playing music files, the following
linear PCM digital signals are supported:
-
Quantitative bits: 16 bit, 24 bit, 32 bit
-
Sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
192 kHz
Output from the DIGITAL OUT connectors is not
supported during Digital In USB input.
Playback cannot be controlled from this unit during
use of this function; use your computer to control
playback.
When disconnecting the USB cable, always stop
playback on the computer first.
Sound may not be produced if your computer does
not support USB 2.0 HS.
This unit does not support use of a USB hub.
Always use a USB cable to connect the unit directly
to the computer.
Important
When using the DIGITAL IN USB port to input
audio files from a computer to this unit, it may be
necessary to install a special driver on the
computer. For details, see the website of Pioneer.
N-50-K_En.book 18 ページ 2011年9月21日 水曜日 午後9時12分
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer N-30-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer N-30-K in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer N-30-K

Pioneer N-30-K Quick start guide - English, German - 32 pages

Pioneer N-30-K User Manual - German - 29 pages

Pioneer N-30-K Quick start guide - Dutch - 32 pages

Pioneer N-30-K User Manual - Dutch - 29 pages

Pioneer N-30-K Quick start guide - French - 32 pages

Pioneer N-30-K User Manual - French - 28 pages

Pioneer N-30-K User Manual - Italian - 28 pages

Pioneer N-30-K Quick start guide - Portuguese, Spanish - 32 pages

Pioneer N-30-K User Manual - Spanish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info