649405
24
Zoom out
Zoom in
Previous page
1/30
Next page
24
Setting the video signal for the
rear view camera
When you connect a rear view camera to this product, select the
suitable video signal setting.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “Video Setup” screen.
2 Touch [Video Signal Setting].
3 Touch [Camera].
The pop-up menu appears.
4 Touch the item you want to set.
Auto (default): Adjusts the video signal setting
automatically.
PAL: Sets the video signal to PAL.
NTSC: Sets the video signal to NTSC.
PAL-M: Sets the video signal to PAL-M.
PAL-N: Sets the video signal to PAL-N.
SECAM: Sets the video signal to SECAM.
Resetting various settings/
Restoring this product to the
default settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p
The settings configured on the “Theme” screen are not
reset.
Method 2: Initialise from the “System” menu
Method 3: Press the RESET button
Resetting the microprocessor on page 4
Restoring the default settings
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “System” setting screen.
2 Touch [Restore Settings].
A message confirming whether to initialise the settings appears.
3 Touch [Restore].
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
Troubleshooting
If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
Problems with the AV screen
The screen is covered by a caution message and the video
cannot be shown.
The handbrake lead is not connected or applied.
Connect the handbrake lead correctly, and apply the
handbrake.
The handbrake interlock is activated.
Park your vehicle in a safe place and apply the handbrake.
The audio or video skips.
This product is not firmly secured.
Secure this product firmly.
No sounds are produced. The volume level will not rise.
Cables are not connected correctly.
Connect the cables correctly.
The picture is stretched, with an incorrect aspect ratio.
The aspect setting is incorrect for the display.
Select the appropriate setting for that image.
iPod cannot be operated.
The iPod is frozen.
Reconnect the iPod with the USB interface cable for iPod /
iPhone.
Update the iPod software version.
An error has occurred.
Reconnect the iPod with the USB interface cable for iPod /
iPhone.
Park your vehicle in a safe place, and turn off the engine.
Turn the ignition key back to off (ACC OFF). Then restart
the engine, and turn the power to this product back on.
Update the iPod software version.
Cables are not connected correctly.
Connect the cables correctly.
Other functionsAppendix
< QRB3560-A >
Other functions Appendix
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer MVH-AV280BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer MVH-AV280BT in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer MVH-AV280BT

Pioneer MVH-AV280BT Installation Guide - English, German - 52 pages

Pioneer MVH-AV280BT User Manual - German - 33 pages

Pioneer MVH-AV280BT Installation Guide - Dutch - 52 pages

Pioneer MVH-AV280BT User Manual - Dutch - 32 pages

Pioneer MVH-AV280BT Installation Guide - French - 52 pages

Pioneer MVH-AV280BT User Manual - French - 32 pages

Pioneer MVH-AV280BT Installation Guide - Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info