60903
114
Zoom out
Zoom in
Previous page
1/182
Next page
Playing and recording from a DV camcorder
08
114
En
Chapter 8
Playing and recording from a DV
camcorder
You can play back and record video from a DV camcorder
connected to the DV IN jack on the front panel of this
recorder.
Important
If you connect a second recorder using a DV cable,
you cannot control the second unit from this one.
You can’t control this recorder remotely from a
component connected to the DV IN jack.
Playing from a DV camcorder
1 Make sure your DV camcorder is connected to the
front panel DV IN jack.
2 From the Initial Setup menu, check that the DV
audio input is setup as you would like.
See DV Input on page 155 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 155).
3 Select ‘DV’, then ‘DV Video Playback’ from
the Home Menu.
4 Start playback on the camcorder.
Images from the camcorder should appear on your TV.
To record the incoming video, press HDD/DVD (LCD
page 1) to select the HDD or a DVD for recording,
then press REC (LCD page 1). Press STOP REC
(LCD page 1) to finish recording.
If there is no signal from the device connected to the
DV jack, or the signal is copy-protected, recording
will pause. It will automatically restart once there is a
recordable signal.
The recorder will only start recording from the DV IN
jack if there is a valid signal. Recording will pause if
the signal is interrupted during recording.
If your source is copy-protected using Copy Guard,
you will not be able to record it. See Restrictions on
video recording on page 92 for more details.
Recording from a DV camcorder
The source signal must be DVC-SD format.
You can’t record date and time information from DV
cassette.
During DV recording, if a part of the tape is blank, or
has copy-protected material on it, this recorder will
pause recording. Recording will restart automatically
when there is a recordable signal. However, if there is
more than two minutes of blank tape, this recorder
will stop recording and the camcorder should stop
(depending on the camcorder).
Copying from a DV source
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Important
Some camcorders cannot be controlled using this
recorder’s remote.
For best results when recording from a DV camcorder
to this recorder, we recommend cueing the
camcorder to the place you want to start recording
from and setting the camcorder to play-pause.
1 Make sure your DV camcorder is connected to the
front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 (LCD page 1) Set the recording quality.
See Setting the picture quality/recording time on
page 95 for detailed information.
3 From the Initial Setup menu, check that the DV
audio input is setup as you would like.
See DV Input on page 155 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 155).
4 Select ‘DV’, then ‘Copy from a DV Source’
from the Home Menu.
DV recording only works when the DV camcorder is
in VTR mode with a tape loaded.
HOME
MENU
SETUP
REC
MODE
HOME
MENU
SETUP
02SDVRLX70D_EN.book 114 ページ 2008年10月9日 木曜日 午後4時38分
Downloaded from www.Manualslib.com manuals search engine
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer LX-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer LX-01 in the language / languages: English as an attachment in your email.

The manual is 13,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer LX-01

Pioneer LX-01 User Manual - English - 2 pages

Pioneer LX-01 User Manual - German - 179 pages

Pioneer LX-01 User Manual - German - 2 pages

Pioneer LX-01 User Manual - Dutch - 180 pages

Pioneer LX-01 User Manual - Dutch - 2 pages

Pioneer LX-01 User Manual - Danish - 179 pages

Pioneer LX-01 User Manual - French - 179 pages

Pioneer LX-01 User Manual - French - 2 pages

Pioneer LX-01 User Manual - Italian - 179 pages

Pioneer LX-01 User Manual - Italian - 2 pages

Pioneer LX-01 User Manual - Swedish - 356 pages

Pioneer LX-01 User Manual - Spanish - 179 pages

Pioneer LX-01 User Manual - Norwegian - 356 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info