60903
95
Zoom out
Zoom in
Previous page
1/182
Next page
Recording
06
95
En
Setting the picture quality/recording
time
Before starting a recording, you will usually want to set
the picture quality/recording time. There are six standard
settings available, which allow you to choose a balance
between picture quality and recording time.
When Manual Recording is set to On (see Manual
Recording on page 157), a further option will be available
(MN1 to MN32, LPCM, or XP+ (a super-high quality HDD
recording mode that features a transfer rate of around 15
Mbps) depending on what you set).
When recording to DVD, MN32 is the highest recording
quality available. If you select XP+, the recording mode
will automatically revert to MN32.
When recording to DVD+R/+RW,
SLP
is the longest
recording time available. If you select
SEP
or
MN1
to
MN3
, the recording mode will automatically revert to
SLP
.
(LCD page 1) Press repeatedly to select the
recording quality.
XP – High quality setting, gives about one hour of
recording time on a DVD disc.
SP (Standard Play) – Default quality, used for most
applications, gives about two hours of recording time
on a DVD.
LP (Long Play) – Lower video quality than SP, but
doubles the recording time on a DVD to about four
hours.
EP (Extended Play) – Lower quality than LP, but gives
about six hours of recording time on a DVD disc.
SLP (Super Long Play) – Lower quality than EP, but
gives about eight hours of recording time on a DVD
disc.
SEP (Super Extended Play) – Lowest video quality but
gives about ten hours of recording time on a DVD
disc.
MN1 to MN32/LPCM
1
/XP+
2
– Manual/Linear PCM/
XP+ (available only when manual recording is on).
The setting is indicated in the front panel display, and
shown on-screen together with the recording time for a
blank recordable disc. If a recordable disc is loaded, the
approximate remaining recording time for that disc is
also shown. (Note that if the On Screen Display setting
(see On Screen Display on page 160) is Off then this
information is not displayed.)
Basic recording from the TV
Basic recording from the TV involves just setting the
channel to record, choosing whether to record to the
HDD or a DVD and selecting the recording quality.
1 (LCD page 1) Select the HDD or DVD for
recording.
If you’re recording to DVD, load a recordable disc (if
you load a new blank DVD-RW or DVD+RW disc, the
recorder takes a short while to initialize the disc).
If you want to record a VR mode DVD-R or a Video
mode DVD-RW, you must initialize it before
proceeding (see Initializing recordable DVD discs on
page 102).
2 (LCD page 2) Press to switch between D.TV
(digital) and A.TV (analog).
3 Select a TV channel to record.
The front panel display shows the channel number, or
channel name if it’s available:
While the recorder is stopped, you can also use the
number buttons on the remote to select the channel
(For channel 24, press 2, 4 then ENTER).
4 (LCD page 1) Set the picture quality/
recording time.
•See Setting the picture quality/recording time above
for detailed instructions.
Note
1 Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual broadcast, select which audio chan-
nel to record (see Bilingual Recording on page 155).
2 Applicable only to HDD recording. (If this setting is used when recording to DVD, MN32 is used.) When copied to DVD, XP+ recordings are
always copied in real time.
DVD (VR)
DVD (Video)
DVD+R
DVD+RW
DVD-RAM
HDD
REC
MODE
DVD (VR)
DVD (Video)
DVD+R
DVD+RW
DVD-RAM
HDD
HDD/
DVD
A.TV/
D.TV
CH
-
+
A.TV Channel preset
REC
MODE
02SDVRLX70D_EN.book 95 ページ 2008年10月9日 木曜日 午後4時38分
Downloaded from www.Manualslib.com manuals search engine
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer LX-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer LX-01 in the language / languages: English as an attachment in your email.

The manual is 13,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer LX-01

Pioneer LX-01 User Manual - English - 2 pages

Pioneer LX-01 User Manual - German - 179 pages

Pioneer LX-01 User Manual - German - 2 pages

Pioneer LX-01 User Manual - Dutch - 180 pages

Pioneer LX-01 User Manual - Dutch - 2 pages

Pioneer LX-01 User Manual - Danish - 179 pages

Pioneer LX-01 User Manual - French - 179 pages

Pioneer LX-01 User Manual - French - 2 pages

Pioneer LX-01 User Manual - Italian - 179 pages

Pioneer LX-01 User Manual - Italian - 2 pages

Pioneer LX-01 User Manual - Swedish - 356 pages

Pioneer LX-01 User Manual - Spanish - 179 pages

Pioneer LX-01 User Manual - Norwegian - 356 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info