573876
60
Zoom out
Zoom in
Previous page
1/126
Next page
Additional information14
60
En
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
1
With the system on,
press
SHIFT+SETUP
.
2Use
/
to select INITIAL then press
ENTER.
3Use
/
to select ALL INIT then press
ENTER
.
INIT OK is displayed.
4Press
ENTER
while INIT OK is blinking.
1
Using the language code list
Some of the language options (see Language
settings on page 39) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1 Select ‘Other Language’.
2Use
/
to select either a code letter or
a code number.
3Use
/
to select a code letter or a code
number.
See the Language code list below for a
complete list of languages and codes.
NO MIC
• Appears when you press SHIFT+KARAOKE, SHIFT+ECHO, SHIFT+, SHIFT+or
MIC VOL +/– when no mic is inserted.
OC ERR 1
OC ERR 2
• Check whether the speaker cables are short-circuited. If the error message
continues to be displayed, contact your Pioneer authorized service center or your
dealer for servicing.
OVER TEMP • Try lowering the volume. If this problem is not fixed by removing and inserting
the power cable, this unit may be damaged. In such an event, please contact a
Pioneer-authorized service center or your nearest dealer.
BT ERR • Power consumption by Bluetooth ADAPTER is too high to supply the power.
Reconnect the Bluetooth ADAPTER.
TV AUDIO • Indicator is lit for two seconds if the listening mode is changed while HDMI
audio mode is set for TV.
CANNOT Operation is prohibited because DVD/CD or USB isn’t selected.
• Appears when DVD/CD is not selected and SHIFT+USB REC is pressed.
KARAOKE Appears when you press SURROUND, SOUND, AUTO/STEREO, SOUND
RETRIEVER or SHIFT+MCACC (
HTZ585DVD-AP/HTZ787DVD/HTZ787DVD-AP only
)
when a mic is inserted.
TRAYLOCK • The tray lock is on. See General in Troubleshooting on page 56.
KEYLOCK • The key lock is enabled. See Setting the sleep timer on page 51.
PHONESIN • An operation is prohibited because the headphones are connected.
HDMI ERR • See HDMI connection above for troubleshooting tips. See also Resetting the
HDMI connection on page 44 if the problem persists.
USB ERR • See Important in Using the USB interface on page 32 for more on this.
EEP ERR • Contact your Pioneer authorized service center or your dealer for servicing.
EXIT • Appears when any prohibited signal is input or the headphones are connected
while the menu screen is displayed, and then the display returns to the normal
display.
Message Description
Note
1 Do not operate the unit without reason or pull the power cord because the system’s power automatically turns on.
14_Additional_information.fm 60 ページ 2009年4月16日 木曜日 午前11時20分
Downloaded from www.Manualslib.com manuals search engine
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ787DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ787DVD in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info