573876
21
Zoom out
Zoom in
Previous page
1/126
Next page
Getting started 04
21
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Reducing AM reception noise
If AM reception seems particularly poor, or the
AM radio station you’re listening to seems
noisy, try using the Noise Cut feature for better
sound quality.
1 Tune to an AM radio station then press
SHIFT+SETUP.
2Use
/
to choose
TUNERSET
then
press ENTER.
3Use
/
to choose NOISECUT then press
ENTER.
4Use
/
to select the noise cut mode
then press
ENTER
.
Select an effect level between 1 or 2.
Memorizing stations
This system can memorize up to 30 stations,
stored in three banks, or classes (A, B and C) of
10 stations each.
1 Tune to an AM or FM radio station.
Select mono or auto-stereo reception (FM) as
necessary. These settings are saved along with
the preset.
2 Press
SHIFT+T.EDIT
.
3 Press
CLASS
to select one of the three
classes, then use the
PRESET
buttons to select
the station preset you want.
You can also use the number buttons to select
a preset.
4 Press
ENTER
.
After pressing ENTER, the preset class and
number stop blinking and the system
memorize station.
Listening to station presets
You will need to have some presets stored to do
this.
1 Make sure the
TUNER
function is
selected.
2 Press
CLASS
to select the class in which
the channel is stored. Press repeatedly to
cycle through classes A, B and C.
3Use the
PRESET
buttons to select a station
preset.
You can also use the number buttons to do
this.
Audio input settings from the
TVs (TV Input)
To listen to audio from a flat screen TV on this
device, you will need to connect an audio cable
other than an HDMI cable. From this menu, set
the audio input to that which you would like to
connect. This setting is effective only when
KURO LINK is set to LINK ON and this unit is
connected with a KURO LINK-compatible
Pioneer flat screen TV (see KURO LINK Setup
on page 48).
Select from inputs DIGITAL AUDIO (LINE1)
and ANALOG AUDIO (LINE2).
1Press
SHIFT+SETUP
and use
/
to
select
SYS SET
then press
ENTER
.
2
Use / to
select
TV INPUT
, then press
ENTER
.
3
Use / to
adjust the setting then press
ENTER
to confirm.
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting using the
component video output on page 43 for more
on this.
To connect a USB device to the USB
terminal, see USB playback and Recording
on page 32.
HTZ585/787/FS30DVD-AP only:
Bluetooth ADAPTER is selectable when it is
plugged and detected. See Bluetooth
®
ADAPTER for Wireless Enjoyment of Music
on page 45 for more on this.
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2Press
LINE
to select the source.
Each press switches between LINE
1
and
LINE
2
.
3 If necessary, start playback of the source.
HTZ585DVD_EN.book 21 ページ 2009年3月19日 木曜日 午後6時35分
Downloaded from www.Manualslib.com manuals search engine
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ787DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ787DVD in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info