573918
45
Zoom out
Zoom in
Previous page
1/50
Next page
Additional information
10
45
En
English
FrançaisDeutsch
Nederlands
Italiano Español
HDMI connection
(XV-DV656 only)
Error Messages
Problem
Remedy
No HDMI audio output. • See
Switching the HDMI audio setting
on page 34 to make sure that
AUDIO ON
is selected.
No HDMI video output • Make sure that you’ve selected this player as the HDMI input in the settings for
the component you’re using (refer to the component’s instruction manual).
• Check that the HDMI cable is connected properly and isn’t damaged.
• Check that components connected using the HDMI interface are switched on
and HDMI compatible. (components must be compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
• This unit has been designed to be compliant with HDMI Version 1.1. Depending
on the component you have connected, using a DVI connection may result in
unreliable signal transfers.
• Make sure the resolution on this unit matches that of the component connected
using HDMI. See
Video Output settings
on page 27 to change the resolution.
• If the screen goes blank after changing the resolution, it means the you selected
a resolution incompatible with your monitor. See
Resetting the HDMI connection
on page 34 to reset to the factory defaults.
Color problems occur
with your monitor after
changing the
HDMI
Color
setting (page 28).
• Depending on the connected equipment, some
HDMI Color
settings may cause
the picture to be displayed incorrectly. In this case, use the TV's own video input
settings to select RGB, if possible. Alternatively, revert to the previous
HDMI Color
setting.
Message
Description
2CH ONLY
• An operation is prohibited because it is only applicable to 2 channel sources,
while the current source is a multichannel source.
96K
• An operation is prohibited because the source is 96 kHz digital.
SND. DEMO
• The sound demo is on. See
General
in
Troubleshooting
on page 42.
NOISY
• Background noise is too high to complete MCACC setup successfully.
ERR MIC
• An error occured during MCACC setup because the microphone is not
connected or is not connected properly.
ERR SP
• An error occured during MCACC setup because the speakers are not connected
or are not connected properly.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
STEREO
• An operation is prohibited because the tuner is selected.
TRAYLOCK
• The tray lock is on. See
General
in
Troubleshooting
on page 42.
KEY LOCK
• The key lock is enabled. See
Key lock setting
on page 37.
PHONESIN
• An operation is prohibited because the headphones are connected.
USB ERR
• See
Important
in
Using the USB interface
on page 23 for more on this.
XV-DV353_555.book 45 ページ 2006年5月11日 木曜日 午前9時43分
Downloaded from www.Manualslib.com manuals search engine
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ656DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ656DVD in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info