573918
33
Zoom out
Zoom in
Previous page
1/50
Next page
Other connections
09
33
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Important
With an SR+ cable connected, the remote
must now be pointed towards your plasma
display rather than the remote sensor of
this unit in order to control this system.
Use a 3-ringed miniplug SR+ cable to
connect the
CONTROL IN
jack of this unit
through a media receiver to the
CONTROL
OUT
jack of your plasma display.
1
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ Setup for Pioneer plasma displays
below
for detailed instructions.
SR+ Setup for Pioneer plasma
displays
Make the following settings if you have
connected a Pioneer plasma display to this
unit using an SR+ cable. Note that the number
of video inputs available will depend on the
plasma display you’ve connected.
1 Press
SHIFT+SR+
on the remote.
2 Use the
/
to select SETUP, then
press ENTER.
3 Use
/
to select the setting you want.
VOL.C OFF
– This unit does not control the
volume of the plasma display.
VOL.C ON
– When this unit is switched to
one of the inputs that use the plasma
display (
DVD
, or another one of functions
below), the volume on the plasma display is
muted so only sound from this system is
heard.
4 Assign any input source connected to the
plasma display to the corresponding input
number.
Use
/
to select the source (
DVD
,
LN
(
LINE
) or
USB
), then
/
to select the input
number.
This matches this unit’s input source with a
numbered video input on the plasma display.
2
For example, select the
LN PDP3
setting if the
video output of your line component is
connected to video input 3 on the plasma
display.
TVTN
switches the plasma display to
its built-in tuner and
NONE
leaves the plasma
display input as is (no switching takes place).
5 When you're finished, press
ENTER
.
Switching on the SR+ mode
1
Press
SHIFT+SR+
on the remote.
2 Use
/
to select SR+ ON then press
ENTER.
To switch SR+ control off, select
SR+ OFF
.
If you disconnect the SR+ cable or switch
the plasma display off while SR+ is on, the
SR+ ON
setting remains.
The SR+ setting is maintained even after
switching this system into standby then
back on. Automatic muting will be effective
when this system is switched on.
Note
1 You won’t be able to use the remote sensor of this unit with the
CONTROL IN
jack of this unit connected to the
CONTROL
OUT
jack of your plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power
isn’t switched off.
2 The
PDP5
input may be called ‘PC Input’ (or similar) on your plasma display.
Other connections.fm 33 ページ 2006年5月11日 木曜日 午前10時36分
Downloaded from www.Manualslib.com manuals search engine
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ656DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ656DVD in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info