573923
36
Zoom out
Zoom in
Previous page
1/102
Next page
Other connections9
36
En
Important
With an SR+ cable connected, the remote
must now be pointed towards your flat
screen TV rather than the remote sensor of
this unit in order to control this system.
Use a 3-ringed miniplug SR+ cable to
connect the
CONTROL IN
jack of this unit
through a media receiver to the
CONTROL
OUT
jack of your flat screen TV.
1
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ Setup for Pioneer Flat Screen TVs below for
detailed instructions.
SR+ Setup for Pioneer Flat Screen TVs
Make the following settings if you have
connected a Pioneer flat screen TV to this unit
using an SR+ cable. Note that the number of
video inputs available will depend on the flat
screen TV you’ve connected.
1 Press
SHIFT+SR+
on the remote.
2Use the / to select SETUP, then
press ENTER.
3Use
/
to select the setting you want.
VOL.C OFF – This unit does not control the
volume of the flat screen TV.
VOL.C ON – When this unit is switched to
one of the inputs that use the flat screen TV
(DVD, or another one of functions below),
the volume on the flat screen TV is muted
so only sound from this system is heard.
4 Assign any input source connected to the
flat screen TV to the corresponding input
number.
Use / to select the source (DVD, LN1/2
(LINE 1/2) or USB), then / to select the
input number.
This matches this unit’s input source with a
numbered video input on the flat screen TV.
2
For example, select the LN1 PDP3 or LN2
PDP3 setting if the video output of your line
component is connected to video input 3 on
the flat screen TV. TVTN switches the flat
screen TV to its built-in tuner and NONE leaves
the flat screen TV input as is (no switching
takes place).
5 When you’re finished, press
ENTER
.
Switching on the SR+ mode
1
Press
SHIFT+SR+
on the remote.
2Use / to select SR+ ON then press
ENTER.
To switch SR+ control off, select SR+ OFF.
If you disconnect the SR+ cable or switch
the flat screen TV off while SR+ is on, the
SR+ ON setting remains.
The SR+ setting is maintained even after
switching this system into standby then
back on. Automatic muting will be effective
when this system is switched on.
Note
1 You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT
jack of your flat screen TV. You can use the remote sensor of the flat screen TV (even in standby) as long as the power isn’t
switched off.
MCACC
SETUP MIC
DIGITAL IN
OPTICAL
LINE 1
VIDEO OUT
VIDEO
Y
P
R
P
B
COMPONENT
VIDEO
CONTROL
IN
Pioneer flat
screen TV
To control
output
2The PDP5 input may be called ‘PC Input’ (or similar) on your flat screen TV.
HTZ373_777_EN.book Page 36 Wednesday, March 5, 2008 1:08 PM
Downloaded from www.Manualslib.com manuals search engine
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ373DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ373DVD in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info