573923
27
Zoom out
Zoom in
Previous page
1/102
Next page
Surround sound settings 06
27
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Chapter 6
Surround sound settings
Using the Setup menu
From the Setup menu you can access all the
surround sound settings of the system
1
,
including channel levels, speaker distances
and dynamic range adjustment. The Auto
MCACC feature (page 11) should give you the
best surround sound setup. However you may
find that by further adjustment of the surround
sound settings you can improve the surround
sound in your listening room.
1 Press
SHIFT+SETUP
and use
/
then
ENTER
to choose the setting you want to
adjust.
The available settings are shown in the front
panel display.
2
2Use
/
to adjust then press
ENTER
to
confirm and exit.
Note that using the Auto MCACC (page 11)
again overwrites the speaker settings.
Channel level setting
Set the relative channel levels from your main
listening position.
3
Use / to switch between channels in the
following order:
L – Front left speaker
C – Center speaker
R – Front right speaker
SR – Surround right speaker
SL – Surround left speaker
SW Subwoofer
The channel level range is ±10 dB.
Speaker distance setting
Specifies the distance from your listening
position to your speakers.
When DISTANCE appears, press ENTER, then
use / to adjust the distance, and
/ to
switch between the following speakers:
L – Front left speaker
C – Center speaker
R – Front right speaker
SR – Surround right speaker
SL – Surround left speaker
SW Subwoofer
Each speaker can be adjusted between 0.3 m
and 9.0 m. The default setting is 3.0 m.
Dynamic Range Control
Specifies dynamic range adjustment to Dolby
Digital or some DTS soundtracks. If low level
sound or dialogue seem difficult to hear
properly, this can help by bringing up the low
level sounds, while controlling high level
peaks.
DRC OFF (default) – No dynamic range
adjustment (use when listening at higher
volumes)
DRC MID – Mid setting
DRC HIGH – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
Note
1 There are other settings you can adjust from the Setup menu; these are explained in Improving poor FM reception on page 14
and Dimming the display on page 38.
2 The setup menu is exited automatically after five minutes of inactivity.
3 • You can’t adjust center/surround when Stereo or Virtual playback is selected (or with stereo sources using the Auto mode).
• The Channel level setting is not available when headphones are connected.
• The speaker volume can be adjusted at any time by pressing SHIFT+TEST TONE and then using / to adjust the channel
levels. The test tone automatically moves from speaker to speaker in the order listed above. You should hear the test tone at the
same volume from each speaker when seated in the main listening position. Press ENTER when you’re finished.
• Since the subwoofer produces ultra-low frequencies it may seem quieter than it actually is.
HTZ373_777_EN.book Page 27 Wednesday, March 5, 2008 1:08 PM
Downloaded from www.Manualslib.com manuals search engine
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ373DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ373DVD in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info