573879
24
Zoom out
Zoom in
Previous page
1/126
Next page
Listening to your system05
24
En
Listening in stereo
You can listen to any source — stereo or
multichannel — in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
In the Auto level control stereo mode (A.L.C.),
this unit equalizes playback sound levels if
each sound level varies with the music source
recorded in a portable audio player.
Press
AUTO/STEREO
repeatedly to select
STEREO or A.L.C. mode.
Listening with headphones
When headphones are connected, only the
STEREO
(default),
A.L.C.
or PHONESUR (virtual
surround sound for headphones) modes are
available.
With headphones connected, press
AUTO/STEREO
or
SURROUND
to select
STEREO, A.L.C. or
PHONESUR
.
Listening with Acoustic
Calibration EQ
You can listen to sources using the Acoustic
Calibration Equalization set in Using the Auto
MCACC setup for optimal surround sound on
page 17.
1
1 Press
SOUND
and use
/
to select
MCACC EQ then press
ENTER
.
2Use
/
to select EQ ON or EQ OFF
then
press ENTER to confirm
.
•If you select EQ OFF, equalization is set to
off but speaker settings (channel delay and
channel level) remain in effect.
EQ ON
is selected automatically after the
Auto MCACC setup is completed.
Using the Sound Retriever
When audio data is removed during the WMA/
MP3/MPEG-4 AAC compression process,
sound quality often suffers from an uneven
sound image. The Sound Retriever feature
employs new DSP technology that helps bring
CD quality sound back to compressed two-
channel audio by restoring sound pressure
and smoothing jagged artifacts left over after
compression.
While listening to a stereo source, press
SOUND RETRIEVER to select RTRV ON or
RTRV OFF.
Enhancing dialogue
The Dialogue Enhancement feature is
designed to make the dialogue stand out from
other background sounds in a TV or movie
soundtrack.
1Press
SOUND
and use
/
to select
DIALOGUE
then press
ENTER
.
2Use
/
to select the amount of
dialogue enhancement then press
ENTER
to
confirm.
Select between OFF, MID, MAX or AUTO.
Using the Tone controls
You can change the tonal balance of the sound
by using the tone control menu.
1Press
SOUND
and use
/
to select
TONE then press
ENTER
.
2Use
/
to select the option you want
to adjust and press
ENTER
.
The Bass/Treble, Quiet and Midnight features
cannot be used at the same time.
Note
1 Acoustic Calibration EQ is not available when headphones are connected.
HTZ585DVD_EN.book 24 ページ 2009年3月19日 木曜日 午後6時35分
Downloaded from www.Manualslib.com manuals search engine
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ-FS30DVD-AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ-FS30DVD-AP in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info