573865
22
Zoom out
Zoom in
Previous page
1/68
Next page
22
En
4 Shaping the Sound
Adjusting channel
volume levels
Depending on your room and where you’re
sitting, you may want to adjust the relative
volumes of one or more speakers for a
more balanced sound. You can do this in
any mode, including the Dolby Digital/
DTS, DSP, and stereo modes. Settings that
you make in any sound mode are
completely independent and don’t affect
any other mode.
Notes
Each DSP effect has its own set of
channel level settings.
The channel levels you set for the
Dolby/DTS mode apply to all Advanced
Theater effects.
The headphone level is not affected by
the channel level settings.
1 Press SYS then CH SELECT.
Adjustments to the channel volume levels
will affect only the current sound mode.
2 Use the @ and # buttons to
select a channel to adjust.
The display shows the channel and its
current setting.
Remember that not all channels are
available in all sound modes.
3 Use the % and buttons to
adjust the volume of the
current channel.
For best results, sit in your main listening
position when doing this. You can adjust
each speaker in the range of +/-10 dB.
4 When you're done, press
ENTER.
Listening at low volume
When the volume is low, surround effects
tend to become less than satisfactory. Turn
the Midnight listening mode on to enjoy
quality surround sound even at low
volumes.
Press SYS then MIDNIGHT to
switch Midnight listening mode
on/off.
Listening to other
sources with room
effects
You can add room effects to audio CDs and
other stereo sources using the DSP modes.
Different effects work better with different
kinds of music, so don’t be afraid to
experiment a little.
There are seven DSP effects to choose from:
Hall 1 – Large, wood-paneled
concert hall sound.
Hall 2 – Large, stone-walled concert
hall sound.
Jazz – Live jazz club sound.
Dance – Nightclub sound.
Theater 1 – Classic, mid-size movie
theater sound.
Theater 2 – Large, modern movie
theater sound.
Simulated Stereo – Virtual stereo
for mono sources.
Notes
The DSP effects cannnot be used with
96kHz/24-bit sources, or in combina-
tion with the Dolby/DTS mode.
When playing stereo sources with DSP
effects switched off, there is no sound
from the surround and center speakers.
1 Press SYS then DSP to select a
sound mode.
Each press changes the mode as follows:
HALL 1
HALL 2
JAZZ
DANCE
THEATER 1
THEATER 2
SIMULATED STEREO
DSP OFF (no effects added)
To adjust the effect level when
using one of the DSP effects:
1 Press SYS then SOUND CON-
TROL.
2 Use the % and buttons to
adjust the effect level.
You can adjust the effect level in the range
of 10 to 90.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ-55DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ-55DV in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info