573865
11
Zoom out
Zoom in
Previous page
1/68
Next page
11
En
3 Getting Started
1 Press SYS, then SETUP.
This puts the remote into surround setup
mode.
2 Press the @ or # button until
you see FRONT in the display.
3 Use the % and buttons to set
the distance from your main
listening position to the front
speakers.
Ideally, your listening position should be
equidistant from the two front speakers.
The default setting is 3m. You can adjust
the range from 0.3m to 9.0m in steps of
0.3m.
4 Press # to move on to the
CENTER speaker setting.
5 Use the % and buttons to set
the distance from your main
listening position to the center
speaker.
The default setting is 3m. You can adjust
the range from 0.3m to 9.0m in steps of
0.3m.
6 Press # to move on to the
SURROUND speakers setting.
7 Use the % and buttons to set
the distance from your main
listening position to the
surround speakers.
Ideally, your listening position should be
equidistant from the surround speakers.
The default setting is 3m. You can adjust
the range from 0.3m to 9.0m in steps of
0.3m.
8 Press ENTER to make the last
setting and exit.
The setting mode is automatically
exited if no operation is performed
within 20 seconds.
There are several other settings that
you can make from the System Setup
menu to further tailor your surround
sound. See chapter 10 for more on this.
The speaker distance settings have no
effect when the Dolby/DTS mode is set
to VIRTUAL SURR1 or
VIRTUAL SURR2. See page 21 for
more on Dolby/DTS modes.
Setting up for surround sound
You can use this system right out of the box for surround sound with just the default settings.
However, for really great surround sound, we recommend that you spend a few minutes making
some settings that match this system to your listening room. These include setting the distances
from your listening position to your speakers, and balancing the speaker volumes. Unless you
change the layout of your speakers or main listening position, you only need to make these
settings once.
Setting the speaker distances
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ-55DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ-55DV in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info