Manual Pioneer HTP-SL100 (page 2 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

491966

Zoom out

Zoom in

1/80

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

Before you start

S-SL100-LR/S-SL100CR

• This speaker system has an impedance of 8 Ω, and should be

connected only to an amplifier designed with a load

impedance of 8 Ω (the amplifier’s speaker output connector

should clearly be labeled “8 Ω”).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

•Do not supply power to the speaker system in excess of the

maximum permissible input.

•When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

•Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• Do not place the speaker on an unstable surface, as doing so

may cause the speaker to fall and cause damage or bodily

injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• Install the center speaker below the TV. When installing the

center speaker on top of the TV, be sure to secure it with tape

or some other suitable means. Otherwise, the speaker may fall

from the TV due to external shocks such as earthquakes,

endangering those nearby or damaging the speaker.

Caution: in use

• Do not use the speaker to output distorted sound for long

periods of time. This can result in damages to the speaker and

poses a potential fire hazard.

• Do not place heavy or large objects on top of the speaker.

Doing so could provoke the speaker to fall, causing damages

or bodily injury.

• The speaker system grill cannot be removed. Do not try to

forcibly remove it since doing so may damage the grille.

• This product incorporates autoregression technology to

protect the speakers. If the speakers stop emitting noise when

receiving too large a signal, turn the volume down on the amp

and wait a few seconds. The protection feature disables itself

automatically.

S-SLW500

• This product is a passive subwoofer, and must be combined

with the VSX-S300 or other audio device provided with a built-

in subwoofer amplifier.

• This speaker system has an impedance of 4 Ω, and should be

connected only to an amplifier designed with a load

impedance of 4 Ω (the amplifier’s speaker output connector

should clearly be labeled “4 Ω”).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

•Do not supply power to the speaker system in excess of the

maximum permissible input.

•When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

•Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• Do not place the speaker on an unstable surface, as doing so

may cause the speaker to fall and cause damage or bodily

injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• Do not attach these speakers to the wall or ceiling, as they may

cause injury in the event of a fall.

Caution: in use

• Do not use the speaker to output distorted sound for long

periods of time. This can result in damages to the speaker and

poses a potential fire hazard.

• Do not place heavy or large objects on top of the speaker.

Doing so could provoke the speaker to fall, causing damages

or bodily injury.

• Do not sit or stand on the speaker, or let children play on the

speaker. Doing so could provoke the speaker to fall, causing

damages or bodily injury.

• The speaker system grill cannot be removed. Do not try to

forcibly remove it since doing so may damage the grille.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to

keep the cabinet clean. If necessary, clean with a cloth dipped in

a neutral cleanser diluted five or six times with water, and wrung

out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals

on or near this unit since these will corrode the surfaces.

Pioneer is not responsible for any accidents or damage that

result from improper installation, misuse or modification of

the product, or natural disasters.

S-SL100-LR_S-SL100CR_En.fm 2 ページ２０１１年４月１２日　火曜日　午前１１時３１分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTP-SL100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer HTP-SL100 Manual

Product: