528354
33
Zoom out
Zoom in
Previous page
1/38
Next page
06
06
Home menu
33
En
The HDMI Setup menu
If your TV supports an audio return channel (ARC) function,
connect your TV and this unit with an HDMI cable and the TV
audio will be inputted into this unit via the HDMI terminal
without the need for an audio cable to be connected.
Important
• Use a High Speed HDMI
®
/™ Cable when using the ARC
function. The ARC function may not operate properly with
other HDMI cables.
1 Select ‘HDMI Setup’ from the Home Menu.
2 Choose the ‘ARC’ setting you want.
When a TV supporting the HDMI Audio Return Channel
function is connected to the receiver, the sound of the
TV can be input via the HDMI terminal.
ON – The TV’s sound is input via the HDMI terminal.
OFF – The TV’s sound is input from the audio input
terminals other than HDMI inputs.
3 When you’re finished, press RETURN.
You return to the Home menu.
Before starting ARC operation
When starting ARC operation, put the TV and this unit in
STANDBY mode after connecting this unit with the TV. Next,
turn ON the power of this unit and then the TV, in this order.
In order to start ARC operation, after connecting this unit to
a TV with an HDMI cable, you will need to switch the input on
the TV to the input mode required to connect to this unit.
Then, you can select a TV program.
Important
• The ARC function may not operate even if the above
conditions are met. If this is the case, listen to the TV
audio after connecting this unit and the TV with an audio
cable.
The CEC (Consumer Electronic Control) function may
activate when the ARC function is turned ON, causing
power to turn ON and OFF and the input to switch from
one to another. Since this unit does not guarantee
synchronized operation based on the CEC function, we
recommend that you turn OFF the HDMI CONTROL
setting on the connected player. This unit may not
operate properly if the HDMI CONTROL on the player is
ON. Refer to the relevant device's instruction manual for
details. If this does not work, turn OFF the ARC function.
If this is the case, listen to the TV audio after connecting
this unit and the TV with an audio cable. In addition, this
unit does not guarantee synchronized operation that
allows the TV remote control to operate the volume
(including mute). Use this unit to operate the volume
(including mute).
Turn OFF the power and remove the power cord from the
wall socket when connecting other devices or making
connection changes to this unit. After all connections are
completed, insert the power cord into the wall socket.
If the power cord is connected when the ARC function is
ON, the HDMI will take 2 to 10 seconds to initialize. This
unit cannot be operated during the initialization. During
initialization, the HDMI indicator on the display will blink.
Turn ON the unit after blinking stops.
Home Menu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
Return
4.HDMI Setup
Return
ARC OFF
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTP-073 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTP-073 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer HTP-073

Pioneer HTP-073 Quick start guide - English - 28 pages

Pioneer HTP-073 User Manual - English - 10 pages

Pioneer HTP-073 Quick start guide - German - 28 pages

Pioneer HTP-073 User Manual - German - 10 pages

Pioneer HTP-073 User Manual - German - 38 pages

Pioneer HTP-073 Quick start guide - Dutch - 28 pages

Pioneer HTP-073 User Manual - Dutch - 10 pages

Pioneer HTP-073 User Manual - Dutch - 38 pages

Pioneer HTP-073 Quick start guide - French - 28 pages

Pioneer HTP-073 User Manual - French - 10 pages

Pioneer HTP-073 User Manual - French - 38 pages

Pioneer HTP-073 Quick start guide - Italian - 28 pages

Pioneer HTP-073 User Manual - Italian - 38 pages

Pioneer HTP-073 User Manual - Italian - 10 pages

Pioneer HTP-073 Quick start guide - Spanish - 28 pages

Pioneer HTP-073 User Manual - Spanish - 38 pages

Pioneer HTP-073 User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info