528355
32
Zoom out
Zoom in
Previous page
1/38
Next page
06
06
Home menu
32
En
Adjust the level of each speaker as the test tone is emitted.
If you are using a Sound Pressure Level (SPL) meter, take
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
• The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6 When you’re finished, press RETURN.
You return to the Manual SP Setup menu.
• You can change the channel levels at any time by press
, then press CH SELECT and LEV +/– on the
remote control. You can also press CH SELECT and use
/ to select the channel, and then use / to adjust
the channel levels.
Speaker Distance
For good sound depth and separation from your system, you
need to specify the distance of your speakers from the
listening position. The receiver can then add the proper delay
needed for effective surround sound.
For the assignment of the digital signal inputs, see
Selecting the audio input signal on page 20.
1 Select ‘Manual SP Setup’ from the Home Menu.
2 Select ‘Speaker Distance’ from the Manual SP Setup
menu.
3 Adjust the distance of each speaker Using
/
.
You can adjust the distance of each speaker in 0.1 m
increments.
4 When you’re finished, press RETURN.
You return to the Manual SP Setup menu.
The Input Assign menu
ANALOG IN1 audio input terminal is assigned to CD under
factory settings, but this can be changed to TV input.
1 Select ‘Input Assign’ from the Home Menu.
2 Select ‘Analog Input’ from the Input Assign menu.
3 Select the desired input option for the ANALOG IN1
audio input terminal.
4 When you’re finished, press RETURN.
You return to the Input Assign menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting:
European and U.K. models: 6 H
Australia and New Zealand models: OFF
1 Select ‘Auto Power Down’ from the Home Menu.
2 Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3 When you’re finished, press RETURN.
You return to the Home menu.
RECEIVER
1.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
1d.Speaker Distance
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 3.0 m ]
[ 3.0 m ]
[ 3.0 m ]
[ 3.0 m ]
[ 3.0 m ]
3.0 m
Home Menu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
Return
2.Input Assign
Return
a.Analog Input
2a.Analog Input
Return
Analog
CD
Home Menu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
Return
3.Auto Power Down
Return
6H
Auto Power Down
VSX-324-K-P_YXE8_VYXE8_PWXE.book 32 ページ 2013年3月13日 水曜日 午前11時32分
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTP-072 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTP-072 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer HTP-072

Pioneer HTP-072 Quick start guide - English, German - 28 pages

Pioneer HTP-072 User Manual - German - 38 pages

Pioneer HTP-072 Quick start guide - Dutch - 28 pages

Pioneer HTP-072 User Manual - Dutch - 38 pages

Pioneer HTP-072 User Manual - Danish - 40 pages

Pioneer HTP-072 User Manual - Danish - 12 pages

Pioneer HTP-072 Quick start guide - French - 28 pages

Pioneer HTP-072 User Manual - French - 10 pages

Pioneer HTP-072 Quick start guide - Italian - 28 pages

Pioneer HTP-072 User Manual - Italian - 10 pages

Pioneer HTP-072 User Manual - Portuguese - 10 pages

Pioneer HTP-072 User Manual - Turkish - 40 pages

Pioneer HTP-072 User Manual - Turkish - 12 pages

Pioneer HTP-072 Quick start guide - Spanish - 28 pages

Pioneer HTP-072 User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info