573843
25
Zoom out
Zoom in
Previous page
1/31
Next page
The System Setup menu
25
En
05
05
Chapter 5:
The System Setup menu
Using the System Setup menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
• If headphones are connected to the receiver, disconnect
them.
1Press
RECEIVER
to switch the receiver on.
2 Press , then press SETUP.
The System Setup menu appears on the front panel display.
Use /// and ENTER on the remote control to
navigate through the screens and select menu items. Press
RETURN to confirm and exit the current menu.
•Press SETUP at any time to exit the System Setup menu.
3 Select the setting you want to adjust.
SP SETUP
-
SP SET – Specify the size and number of speakers you’ve
connected (see below).
-
X.OVER – Specify which frequencies will be sent to the
subwoofer (page 25).
-
CH LEVEL – Adjust the overall balance of your speaker
system (page 26).
-
SP DISTN – Specify the distance of your speakers from
the listening position (page 26).
HDMI SETSet when using the ARC function. (see ARC
Setup on page 27).
APD – Sets to automatically turn off the power when the
receiver has not operated for several hours (see The Auto
Power Down menu on page 26).
FL DEMO – Sets the demo display on the front panel
display (see The FL Demo Mode menu on page 26).
The Speaker Setup menu
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers).
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘SP SET’ from the SP SETUP menu,
then press ENTER.
3Use
/
to select the set of speakers that you want to
set then select a speaker size.
Use / to select the size (and number) of each of the
following speakers:
F (Front) –Do not change from SMALL.
C (Center) – Select SMALL if you connect a center. If you
didn’t connect a center speaker, choose NO (the center
channel is sent to the other speakers).
S (Surround) – Select SMALL if you connect a surround
speakers. If you didn’t connect surround speakers choose
NO (the sound of the surround channels is sent to the
other speakers).
SB (Surround Back) – Select the number of surround
back speakers you have (one (X1), two (X2) or none). If
you didn’t connect surround back speakers choose NO.
-
If you select one surround back speaker only, make sure
that additional amplifier is hooked up to the PRE OUT L
(Single) terminal.
SW (Subwoofer) – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the PLUS
setting if you want the subwoofer to output bass sound
continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4 When you’re finished, press RETURN.
You return to the Speaker Setup menu.
Note
If you select SMALL for the front speakers, the subwoofer
will automatically be fixed to YES. Also, the center,
surround and surround back speakers can’t be set to
LARGE (L) if the front speakers are set to SMALL. In this
case, all bass frequencies are sent to the subwoofer.
If the surround speakers are set to NO, the surround back
speakers will automatically be set to NO.
If you have a subwoofer and like lots of bass, it may seem
logical to select LARGE for your front speakers and PLUS
for the subwoofer. This may not, however, yield the best
bass results. Depending on the speaker placement of
your room you may actually experience a decrease in the
amount of bass due to low frequency cancellations. In
this case, try changing the position or direction of
speakers. If you can’t get good results, listen to the bass
response with it set to PLUS and YES or the front speakers
set to LARGE and SMALL alternatively and let your ears
judge which sounds best. If you’re having problems, the
easiest option is to route all the bass sounds to the
subwoofer by selecting SMALL for the front speakers.
LARGE setting is not use with this system. If each speaker
is connected, select the SMALL setting.
• Do not change the crossover frequency from 200 Hz.
Crossover Network
• Default setting: 200Hz
This setting decides the cutoff between bass sounds playing
back from the speakers selected as LARGE, or the subwoofer,
and bass sounds playing back from those selected as
SMALL. It also decides where the cutoff will be for bass
sounds in the LFE channel.
• For more on selecting the speaker sizes, see Speaker
Setting on page 25.
INPUT SELECT
SOURCESLEEP
TV
CONTROL
INPUT
RECEIVER
CH
RECEIVER
BD DVD TV
DVR/BDR
CD
CD R
DTV/TV
ENTER
MUTE
RETURN
PARAMETER
TOOLS
VOLUME
BAND
MENU
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
HOME
MENU
SETUP
PTY SEARCH
RECEIVER
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTP-070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTP-070 in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer HTP-070

Pioneer HTP-070 Quick start guide - English, German - 28 pages

Pioneer HTP-070 User Manual - German - 10 pages

Pioneer HTP-070 User Manual - German - 31 pages

Pioneer HTP-070 Quick start guide - Dutch - 28 pages

Pioneer HTP-070 User Manual - Dutch - 10 pages

Pioneer HTP-070 User Manual - Dutch - 31 pages

Pioneer HTP-070 Quick start guide - French, Italian - 28 pages

Pioneer HTP-070 User Manual - Italian - 10 pages

Pioneer HTP-070 User Manual - Italian - 31 pages

Pioneer HTP-070 Quick start guide - Spanish - 28 pages

Pioneer HTP-070 User Manual - Spanish - 10 pages

Pioneer HTP-070 User Manual - Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info