544415
64
Zoom out
Zoom in
Previous page
1/145
Next page
Playing and recording from a DV/HDD camcorder
07
64
En
Important
•Some camcorders cannot be controlled
using this recorder’s remote.
•For best results when recording from a
DV camcorder to this recorder, we
recommend cueing the camcorder to
the place you want to start recording
from and setting the camcorder to
play-pause.
1 Make sure your DV camcorder is
connected to the front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 Set the recording quality.
See Setting the picture quality/recording
time on page 37 for detailed information.
3 From the Initial Setup menu, check
that the DV audio input is setup as you
would like.
See DV Input on page 115 for more on this.
Check also that the Audio In settings for
External Audio and Dual Mono
Reco
rding are as you want them (see
Audio In on page 114).
4 Display the Home Menu.
5 Select ‘DV/HDD-Cam’ > ‘Copy
from a DV Source’.
•DV recording only works when the DV
camcorder is in VTR mode with a tape
loaded.
6 Select ‘Record to Hard Disk
Drive’ or ‘Record to DVD’.
7 Find the place on the camcorder tape
that you want to start recording from.
For best results, pause playback at the point
from which you want to record.
•Depending on your camcorder, you can
use this recorder’s remote to control the
camcorder using the , , , ,
, and buttons.
8 Select ‘Start Rec’.
•You can pause or stop the recording by
selecting Pa
use Rec or Stop Rec from
the on-screen display. You cannot
control the camcorder from this remote
control during recording.
•If you restart recording after stopping the
camcorder, the first few seconds of the
camcorder tape will not be recorded.
Use the pause button on your camcorder
instead and recording will start
immediately.
HDD, DVD (VR Mode) and DVD-RAM only:
A chapter marker is inserted every time
there is a break in the ti
mecode on the
DV tape. This happens when the
recording is stopped or paused then
restarted, for example.
If you don’t want to see the DV recording
screen during recording, press DISPLAY
to hide it (press again to display).
•While recording, you cannot exit the DV
recording screen using the HOME
MENU or RETURN button.
DV Auto Copy
DV Auto Copy allows you to make an exact
copy of the contents of a DV source to the
HDD or a DVD.
1 Make sure your DV camcorder is
connected to the front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 Set the recording quality.
See Setting the picture quality/recording
time on page 37 for detailed information.
REC MODE
HOME
MENU
ENTER
ENTER
ENTER
Start Rec
Pause Rec
Stop Rec
SP (2h00m/DVD)
32h45m
Stop Stop
1.02.22
Control with these
buttons

Rem.
HDD
REC MODE
DVR660HK_KC_EN.book 64 ページ 2008年2月7日 木曜日 午後2時34分
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVR-660H-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVR-660H-K in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info