544415
46
Zoom out
Zoom in
Previous page
1/145
Next page
Recording
05
46
En
What happens when two or more timer
programmes overlap?
Basically, the programme with the
earlier recording start time has priority.
However, the recorder will start
recording the progr amme with the later
start time after the earlier programme is
finished. If schedule to record two
programmes have the same times (but
different channels, for example), then
only one of the two programmes will be
recorded. In this event you should cancel
the scheduled recording of the lesser
important programme.
If one of the overlapping programmes is
a regular timer programme, you may
choose
‘Cancel Once’
in order to avoid
having it overlap with a separately
scheduled programme
(see Skipping a
regular timer programme on page 44)
.
Simultaneous recording and
playback (Chase Play)
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see Using the Disc Navigator with recordable
discs and the HDD on page 56).
Chase Play is not possible when DV is the
recording input.
Press during recording to
start playback from the beginning of the
current recording
1
.
Press during recording to select
another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
•To stop playback, press STOP
(recording will continue).
•To stop recording, press
F STOP REC
(playback will continue).
Recording from an external
component
You can record from an external component,
such as a camcorder or VCR, connected to
one of the recorder’s external inputs.
1 Make sure that the component you
want to record from is connected
properly to the HDD/DVD recorder.
See Chapter 2 (page 15) for connection
options.
2 Press repeatedly to select one of
the external inputs to record from.
The current input is shown on-screen and in
the front panel display:
L1 – INPUT 1/AUTO START REC
L2 – INPUT 2 (front panel)
L3 – INPUT 3
Check that the Audio In settings for
External Audio and Dual Mono Recording
are as you want them (see Audio In on
page 114).
•If the aspect ratio is distorted (squashed
or stretched), adjust o
n the source
component or your TV before recording.
Note
1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
HDD
PLAY
DISC
NAVIGATOR
DVD (VR)
DVD (Video)
DVD+R
DVD+RW
DVD-RAM
HDD
INPUT SELECT
DVR660HK_KC_EN.book 46 ページ 2008年2月7日 木曜日 午後2時34分
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVR-660H-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVR-660H-K in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info