614696
42
Zoom out
Zoom in
Previous page
1/135
Next page
Recording
05
42
En
VCR Plus+ programming with the
power off
You can enter a PlusCode programming
number when the recorder is in standby.
Note that the recording is always made to
the HDD. If you want to record to a DVD disc,
you’ll need to switch on the power and use
the full VCR Plus+ program screen.
Important
You can’t use this feature until you have
set up the guide channels. see VCR
Plus+ CH Setting on page 111.
You can’t change the recording mode.
You can’t program daily or weekly timer
recordings.
1 Press ‘VCR Plus+’.
The front panel display shows the current
recording mode and prompts you to enter
the PlusCode programming number.
2 Use the number buttons to enter the
PlusCode number.
To clear the last digit entered, press
CLEAR.
3 Press ENTER.
The display shows the timer settings:
Date Start time End time HDD and
Recording channel Recording mode.
If CODE ERROR appears in the display,
check that the number is correct and
that the guide channel is set (see VCR
Plus+ CH Setting on page 111), then set
the timer recording again.
If CAN’T SET appears in the display, it
means that although you entered a valid
PlusCode number, the program has
already finished.
Setting a manual timer recording
The timer recording screen you can see all
the timer programs already set, clear
programs and set up new ones.
1 Press HOME MENU, select Timer
Recording, then Timer Recording.
This screen shows all the timer programs
currently set.
Each row is for one timer recording
program, with the date and time
information, channel, recording mode,
DVD or HDD and recording status.
The amount of free space available on
the HDD and the currently loaded
recordable DVD is shown towards the
bottom of the screen.
In the upper-right corner, the number of
timer programs already set is shown
next to Tmr Pgms.
If there are more than five timer
programs already set, press NEXT
to switch page (go back using the PREV
button).
You can also delete a timer program
before it’s started (before the recorder
enters timer recording standby) by
highlighting it and pressing CLEAR. See
HDD Remain
DVD Remain
59h59m(SP)
1h59m(SP)
3/26 SUN 3:00PM
Tmr Pgms 3/32
Manhattan Open Tennis OK
3/26 SUN 6:00PM – 7:00PM 10ch
World Journey
OK
3/27 MON 7:30PM – 9:00PM 4ch
8ch
Flower
Until 4/20
MON – FRI 1:30PM – 2:00PM
New Input
Timer Program View
05 Recording.fm 42 ページ 2006年3月7日 火曜日 午後3時51分
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVR-543H-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVR-543H-S in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info