491861
27
Zoom out
Zoom in
Previous page
1/44
Next page
3 Turn M.C. to select one of the initial set-
tings.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET (setting the clock)
1 Press M.C. to display the setting mode.
2 Press M.C. to select the segment of the clock dis-
play you wish to set.
HourMinute
3 Turn M.C. to adjust the clock.
CLOCK (clock display)
You can turn the clock display on or off.
The clock display disappears temporarily when you
per form other operations, but the clock display ap-
pears again after 25 seconds.
1 Press M.C. to turn the clock display on or off.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek tun-
ing is 50kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
! The tuning step remains at 50 kHz during manual
tuning.
1 Press M.C. to select the FM tuning step.
50 (50 kHz)100 (100 kHz)
AUTO-PI (auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1 Press M.C. to turn Auto PI seek on or off.
AUX1 (front AUX input setting)/AUX2 (rear RCA
input setting)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press M.C. to turn AUX1/AUX2 on or off.
MUTE/ATT (sound muting/attenuation)
Sound from this system is automatically muted or at-
tenuated when a signal from equipment with a mute
function is received.
! The sound is muted or attenuated, MUTE or ATT
ON are displayed and no audio adjustment is pos-
sible.
! Sound from this system returns to normal when
the muting or attenuation is canceled.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
! MUTE Muting
! ATT-10DB Attenuation
! ATT-20DB Attenuation (ATT -20DB has a
stronger effect than ATT -10DB)
! OFF Muting/attenuation is turned off
V.INPUT (Setting AV input)
You can connect AV components to the video input
with an RCA cable.
For more details, refer to the installation manual.
! Select AUX to watch video of an auxiliary device
as AUX2 source.
1 Press M.C. to select the desired setting.
OFF (off)AUX (auxiliary device)
! To watch video of AUX source, set auxiliary 2 set-
ting on. For details, refer to AUX1 (front AUX input
setting)/AUX2 (rear RCA input setting) on this
page.
DIMMER (dimmer setting)
To prevent the display from being too bright at night,
the display is automatically dimmed when the cars
headlights are turned on. You can turn the dimmer on
or off.
1 Press M.C. to turn dimmer on or off.
REAR-SP (rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to SW, you can connect a rear speaker
lead directly to a subwoofer without using an auxiliary
amp.
Initially, REAR-SP is set for rear full-range speaker
connection (FUL).
1 Press M.C. to select the desired setting.
FULSW
! There will not be any output if you select OFF
in SUB.W even if this setting is changed to
SW. (Refer to SUB.W (subwoofer on/off set-
ting) on page 22).
! Subwoofer output may be switched to off in
the audio menu if this setting is changed.
PREOUT (preout setting)
En
27
Section
02
Operating this unit
Operating this unit
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVH-340UB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVH-340UB in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DVH-340UB

Pioneer DVH-340UB Installation Guide - English - 40 pages

Pioneer DVH-340UB User Manual - German - 52 pages

Pioneer DVH-340UB Installation Guide - German, Dutch - 40 pages

Pioneer DVH-340UB User Manual - Dutch - 48 pages

Pioneer DVH-340UB Installation Guide - French, Italian, Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info