138248
84
Zoom out
Zoom in
Previous page
1/96
Next page
84
En
Connection of mouse and keyboard
A commercially available PS/2 mouse or PS/2 keyboard can be
connected to this units mouse/keyboard connector as follows.
1.Turn this unit’s POWER off to set it to the
standby mode.
2.Connect the PS/2 mouse or PS/2 keyboard
to this unit’s mouse/keyboard connector.
3.Turn this unit’s POWER ON.
Connection is now complete.
If you want to use both the mouse and keyboard, connect
them using a commercially available Y cable.
Note:
÷
The power rating of this mouse/keyboard connector is
no more than 5V 100mA. Do not use a mouse or key-
board with a current drain exceeding the rating of 100mA.
÷
Certain commercially available PS/2 mouse models, PS/
2 keyboard models and Y cables may not be compat-
ible with this unit. For details, please consult PIONEER
technical support.
TV SYSTEM selector
Video output changes as follows according to the playback discs
recorded format.
NTSC-PAL, PAL-NTSC conversion is possible on Video CDs.
PAL-NTSC conversion is not possible on DVDs. When the TV
SYSTEM selector is set to the AUTO position, the discs format
will be output as is. When a CD or disc is not loaded, the previ-
ous video output will be selected.
About MOD. (Modulation) PAL
Most model of the newly developed countdown PAL TV sys-
tem detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrink-
age. On some TVs, the picture may shrink vertically, leaving
black bands at the top and bottom of the screen. This is not
malfunction; it is caused by the NTSC-PAL conversion.
If your PAL TV does not have a V-Hold control, you may not
be able to view NTSC disc because the picture may roll. If the
TV has V-Hold control, adjust it until the picture stop rolling.
Disc
Type Format
DVD NTSC
PAL
Video CD NTSC
PAL
CD, No disc
Output format
Position of TV SYSTEM selector
NTSC PAL AUTO
NTSC MOD. PAL NTSC
––– PAL PAL
NTSC MOD. PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or PAL
AUTO
NTSC
PAL
TV SYSTEM
Y cable
Connecting the player
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer dvd v 7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer dvd v 7300 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info