136582
7
Zoom out
Zoom in
Previous page
1/28
Next page
Connecting up
English
7
En
Chapter 2
Connecting up
Easy connections
The setup described here is a basic setup that allows you to play discs using just the cables supplied
with the player. In this setup, stereo audio is played through the speakers in your TV.
Important
This player is equipped with copy protection technology. Do not connect this player to your TV
via a VCR using audio/video or S-video cables, as the picture from this player will not appear
properly on your TV. (This player may also not be compatible with some combination TV/VCRs
for the same reason; refer to the manufacturer for more information.)
•When connecting to your TV as shown above, do not set the
Component Out
setting (see
Video
Output settings
on page 18) to
Progressive
.
1 Connect the VIDEO OUT and AUDIO OUT L/R jacks to a set of A/V inputs on your TV.
Use the supplied audio/video cable, connecting the red and white plugs to the audio outputs and the
yellow plug to the video output. Make sure you match up the left and right audio outputs with their
corresponding inputs for correct stereo sound.
See below if you want to use a component or S-video cable for the video connection.
DV-470 only:
You can use either of the
AUDIO OUT L/R
jacks for the audio connection. Each pair
of jacks output the same thing.
2 Connect the supplied AC power cable to the AC IN inlet, then plug into a power outlet.
Note
•Before unplugging the player from the power outlet, make sure you first switch it into standby
using either the front panel
STANDBY/ON
button, or the remote control, and wait of the
-OFF-
message to disappear from the player’s display.
For the above reasons, do not plug this player into a switched power supply found on some
amplifiers and AV receivers.
Connecting using a SCART AV cable
A SCART-type AV connector is provided for connection to a TV or AV receiver. The video output is
switchable between ordinary composite, S-video and RGB. See page 23 for how to set it.
The SCART AV connector also outputs analog audio, so there is no need to also connect the
AUDIO
OUT L/R
jacks.
1Use a SCART cable (not supplied) to connect the AV CONNECTOR (RGB) output to a
SCART AV input on your TV (or AV receiver).
Connecting using the S-video output
Connecting using the component video output
You can use the component video output instead of the standard video out jack to connect this player
to your TV (or other equipment). This should give you the best quality picture from the three types of
video output available.
DIGITAL AUDIO OUT
S
L
R
P
R
P
B
Y
COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
AV CONNECTOR (RGB) - TV/AV Receiver
DV-2750
DV-370
Yellow
White
Red
TV
If your TV (or other equipment) has an S-video (S1)
input, you can use the S-video output on this
player instead of the standard (composite) output
for a better quality picture.
•Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video input
on your TV (or monitor or AV receiver).
Line up the small triangle above the jack with the
same mark on the plug before plugging in.
DIGITAL AUDIO OUT
S
L
R
P
R
P
B
Y
COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
AV CONNECTOR (RGB) - TV/AV Receiver
TV
SCART
DV-2750
DV-370
DIGITAL AUDIO OUT
S
L
R
P
R
P
B
Y
COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
TV
S-VIDEO
IN
DV-2750
DV-370
DV370_En_A5New.book Page 7 Thursday, April 1, 2004 6:16 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer dv 370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer dv 370 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer dv 370

Pioneer dv 370 User Manual - Dutch - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info