528316
8
Zoom out
Zoom in
Previous page
1/64
Next page
Incorrect operation is often mistaken for trouble or malfunction. If there is something wrong with this player, check
the symptoms below.
Sometimes the trouble lie in another component connected to this player. Inspect the component and electrical
appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
The player may not operate properly due to static electricity or other external influences. In such cases, normal
operation may be restored by unplugging the power cord then plugging it back in.
Problem Possible causes and solutions
Difference in volume between DVD
and CD.
The volume may sound different due to differences in how the signals are
recorded on the disc.
Disc cannot be played or disc tray
opens automatically.
If the disc is dirty, wipe the dirt off the disc (page 10).
Set the disc with the printed side facing up.
Check the disc’s region number, and if the number is compatible for
playback on the player (page 5). Only the discs with the appropriate
region number or “ALL” can be played.
The power turns off automatically. If Auto Power Off is set to
On
, the power turns off automatically if no
operation has done for over 30 minutes (above).
Picture is stretched, or aspect ratio
cannot be changed.
Refer to the TV’s operating instructions and set the TV’s aspect ratio
properly.
Set TV Screen properly (page 7).
Picture is disturbed or dark during
playback.
When the player and the TV are connected via a video deck, “analog
copy protect function” may cause the picture being played on the video
deck not to display properly. Connect the player and TV directly.
Set the TV system properly. The factory default setting is AUTO. If the
picture is distorted, switch the TV system to the one used in your country
or region (NTSC or PAL) (page 9).
96 kHz/88.2 kHz digital audio
signals are not output from the
COAXIAL DIGITAL AUDIO OUT
terminals.
Set 96 kHz PCM Out to
96kHz
>
48kHz
.
The 96 kHz/88.2 kHz digital audio signals of copyrightprotected discs
cannot be output.
Folder or file names are not
recognized.
This player can recognize up to 299 folders on one disc and 648 files
within one folder. Depending on the folder structure, however, the player
may not be able to recognize certain folders or files.
Folder or file names are not
displayed or properly displayed
Only 1-byte alphanumeric characters can be displayed. Folder and file
names including characters other than 1-byte alphanumeric characters
may be displayed for example as F_007 or FL_001, and the characters
may be garbled.
Much time is required to play
JPEG files.
The player may take longer to display large files.
Black bars are displayed when
playing JPEG files.
Black bars may be displayed along the top and bottom or sides when
JPEG files with different aspect ratios are played.
Troubleshooting
When a USB device is connected
Problem Possible causes and solutions
USB device is not recognized. Turn the power off, then disconnect and reconnect the USB device.
This player does not support USB hubs. Connect the USB device directly.
This player only supports USB mass storage class devices.
This player supports portable flash memory and digital audio playback
devices.
Only the FAT16 and FAT32 file systems are supported. Other file systems
(exFAT, NTFS, etc.) are not supported.
If the USB device is equipped with an AC adapter, use the USB device
with the AC adapter connected.
Some USB devices may not be recognized properly.
File cannot be played. Copyright-protected files cannot be played.
Files stored on a computer cannot be played.
It may not be able to play some files.
Folder or file names are not
displayed or properly displayed.
The maximum displayable number of characters for the folder and file
names on the Disc Navigator is 14.
Folder or file names are not
displayed in alphabetical order.
The order of the folder and file names displayed on the Disc Navigator
is dependant on the time and date when the folders or files were created
on the USB device.
Much time is required to
recognized the USB device.
It may take longer to load data when a large capacity USB device is
connected (this could take several minutes).
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DV-2242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DV-2242 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 23,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info