707103
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
Nl
De instellingen aanpassen
De instellingen aanpassen
Voorkeurinstellingen instellen
*: Standaardinstelling
Instelitems Instelwaarde Omschrijvingen
Instelitems Niveaulampje Instelwaarde Niveaulampje
MASTER OUT ATT.
[CH1] bovenste lampje
knippert
0 dB* [CH2] 0 dB of minder wordt geactiveerd
Stel het attenuatieniveau van het geluid in vanaf
[MASTER1]-uitgangsaansluitingen of [MASTER2]
uitgangsaansluitingen.
–6dB
[CH2] -6 dB of minder wordt geactiveerd
–12dB
[CH2] -12 dB of minder wordt geactiveerd
MIDI CH
[CH1] 2e lampje van boven
knippert
1* ~ 16
MIDI-kanalen 01 t/m 09 worden getoond
door het aantal [CH2]-lampjes dat actief
is.
MIDI-kanalen 10 t/m 16 worden getoond
door de top [MASTER] en max. 6 [CH2]-
lampjes worden actief.
Stel het MIDI-kanaal in.
MIDI BUTTON TYPE
[CH1] 3e lampje van boven
knippert
TOGGLE* [CH2] oranje lampjes gaan branden
Stel in hoe het MIDI-signaal verzonden moet worden.
TRIGGER
[CH2] groene lampjes gaan branden
PC UTILITY
[CH1] 4e lampje van boven
knippert
ON
[CH2] oranje lampjes gaan branden
Stel in of het instelprogramma van de computer
automatisch moet worden gestart wanneer het apparaat
via een USB-kabel op de computer wordt aangesloten.
OFF* [CH2] groene lampjes gaan branden
AUTO STANDBY
[CH1] 5e lampje van boven
knippert
ON* [CH2] oranje lampjes gaan branden
Schakel de functie voor automatisch stand-by in of uit.
OFF
[CH2] groene lampjes gaan branden
FACTORY RESET
[CH1] onderste lampje
knippert
RESET
[CH2] oranje lampjes gaan branden
Alle instellingen worden teruggezet in de
fabrieksinstellingen.
CANCEL
[CH2] groene lampjes gaan branden
VERSION
[CLIP]-lampje op [MASTER]
knippert
1.0 of hoger
1 cijfer: [CH1]
0,1 cijfer: [MASTER]
0,01 cijfer: [CH2]
Dit toont de firmwareversie.
Procedure wijzigen
1 Druk op de -schakelaar tijdens het indrukken van
de [FILTER]-knop.
Het bovenste [CH1]-lampje knippert.
2 Druk op de [CUE]-knop voor kanaal 1 om het in te
stellen onderdeel te selecteren.
Een ander [CH1]-lampje of [CLIP]-lampje op [MASTER] knippert.*
3 Druk op de [CUE]-knop voor kanaal 2 om de in te
stellen waarde te selecteren.
Voor het activeren van de niveaulampjes verandert het aantal lampjes of
de kleur ervan.
4 Druk op de [FILTER]-knop om de instelwaarde in te
stellen.
De niveaulampjes knipperen snel.
5 Druk op de [FILTER]-knop en houd deze langer dan
1 seconde ingedrukt.
De wijzigingsprocedure is voltooid.
* Voor knipperende of brandende lampjes, zie "Voorkeurinstellingen
instellen" hierboven.
Omtrent de automatische
ruststandfunctie
Als [AUTO STANDBY] op [ON] staat, schakelt het apparaat automatisch
over naar de ruststand na 10 uur en als aan alle volgende voorwaarden
is voldaan.
Als geen van de bedieningsknoppen of regelaars wordt bediend.
Als er geen audiosignaal wordt ingevoerd naar elk kanaal van dit
apparaat.
! In de stand stand-by brandt het lampje [STANDBY].
! Wanneer de knop [FILTER] wordt ingedrukt, wordt de stand stand-by
geannuleerd.
! Dit apparaat wordt geleverd met de functie AUTO STANDBY
aangezet. Als u de functie AUTO STANDBY niet wilt gebruiken, zet
[AUTO STANDBY] dan op [OFF].
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DJM-250MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DJM-250MK2 in the language / languages: Dutch as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info