Manual Pioneer DJM-250 (page 11 of 100) (English, German, Dutch, French, Italian, Spanish)

491998

Zoom out

Zoom in

1/100

English

3 Move the crossfader f gradually towards the right.

While checking the sound output from the speakers, operate the cross-

fader to substitute the sound of [CH-1] with the sound of [CH-2].

Mixing is completed once only the [CH-2] sound is being output from the

speakers.

Using the filter function (filter

section)

LPFHPF LPF HPF

SOUND COLOR FILTER

1 2

Each channel is equipped with a SOUND COLOR FILTER function by

which filter effects can be achieved simply by turning a large control.

The treble or bass sound can be removed by turning the

[SOUND COLOR FILTER] control h.

Turn the [CH-1] 1 or [CH-2] 2 [SOUND COLOR FILTER]

control h.

The effect is applied to the sound and the indicator’s color changes.

The effect type and indicator color differs according to the direction in

which the [FILTER] control is turned, as shown on the table below.

Direction of

rotation

Description of effect Indicator

Left

Applies the effect of the

treble sound fading out.

(LPF: low pass filter)

Red (flashing)

Center — Orange (lit)

Right

Applies the effect of the bass

sound fading out.

(HPF: high pass filter)

Green (flashing)

Mixing using the SOUND COLOR FILTER

control

Prepare the unit in advance so that the sound of [CH-1] 1 is being out-

put from the speakers. For instructions on preparation, see Outputting

sound on page 10.

For instructions on monitoring the sound, see Monitoring the sound over

headphones (headphones section) on page 12.

1 Operate the crossfader and [CH-2] 2.

Operate as described in steps 2 to 6 under Mixing using the channel

faders on page 10.

2 Turn the [CH-2] 2 [SOUND COLOR FILTER] control h

fully clockwise.

3 Move the [CH-2] 2 channel fader e away from you.

4 While turning the [CH-1] 1 [SOUND COLOR FILTER]

control h counterclockwise from the center, turn the

[CH-2] 2 [SOUND COLOR FILTER] control h towards the

center.

While checking the sound output from the speakers, operate the

[SOUND COLOR FILTER] controls h and replace the [CH-1] and [CH-2]

sound.

Move the [CH-1] 1 channel fader e towards the front. Mixing is com-

pleted once only the sound of [CH-2] is output from the speakers.

Selecting the crossfader’s curve

characteristics (crossfader section)

THRU

CROSS FADER

— [THRU]: Choose this when you do not want to use the crossfader.

— [

]: Set here for a curve that rises gradually.

— [ ]: Set here for a curve that rises steeply. (When the crossfader

moves away from either the left or right edge, the sound is immedi-

ately output from the opposite side.)

Starting playback of a Pioneer DJ

player using the fader (fader start

section)

FADER START

CH-1 CH-2

If you connect a Pioneer DJ player using a control cable (supplied with

a DJ player), you can start playback of control other operations of the DJ

player with the fader of this unit.

The fader start function can only be used when connected to a Pioneer

DJ player.

Connect this unit and Pioneer DJ player beforehand. For instructions on

connections, see Connecting the input/output terminals on page 6.

To start playback using the channel

faders

1 Set [THRU, , ] (the crossfader curve selector

switch) j to [THRU].

2 Press the [CH-1] or [CH-2] button i in the fader start

section.

Turn the fader start function on.

3 Move the channel fader e to the very front.

4 Set the cue on the DJ player.

The DJ player pauses playback at the cue point.

5 Move the channel fader e away from you.

Playback starts on the DJ player.

! If you set the channel fader back to the original position, the player

instantaneously returns to the cue point already set and pauses

playback (back cue).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DJM-250 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DJM-250 Manual

Product: