Manual Pioneer DJM-2000 (page 12 of 204) (English, German, Dutch, French, Italian, Spanish)

491989

Zoom out

Zoom in

1/204

DRB1497-B

x Crossfader (page 12)

y MASTER (page 12)

z Master Level Indicator (page 12)

A BALANCE (page 13)

B MONO, STEREO (page 13)

C BOOTH MONITOR (page 13)

D START/

STOP (SNAPSHOT) (page 16)

E ON/

OFF (MIDI) (page 16)

F CH EQ (ISOLATOR, EQ) (page 12)

G CH FADER (

, ) (page 13)

H CROSS FADER (

, , ) (page 13)

Basic Operation

Outputting sound

1 Press [POWER].

Turn on the power of this unit.

2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch

Select the input sources for the different channels from among the devices con-

nected to this unit.

— [CD/DIGITAL]: Selects the DJ player connected to the [CD] terminals. To

select the DJ player connected to the [DIGITAL IN] terminal, set the [CD,

DIGITAL] switch on the rear panel to [DIGITAL].

— [PHONO]: Selects the analog player connected to the [PHONO]

terminals.

— [LINE]: Selects the cassette deck or CD player connected to the [LINE]

terminals.

— [USB */*]: Selects the sound of the computer connected to the [USB]

port.

3 Rotate [TRIM].

Adjusts the level of audio signals input in each channel.

The corresponding channel level indicator lights when audio signals are being

properly input to that channel.

4 Set the channel fader to the inner position.

Adjusts the level of audio signals output in each channel.

5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch.

Switches the output destination of each channel.

— [A]: Assigns to [A] (left) of the crossfader.

— [B]: Assigns to [B] (right) of the crossfader.

— [THRU]: Choose this when you do not want to use the crossfader. (The

signals do not pass through the crossfader.)

6 Set the crossfader.

This operation is not necessary when [CROSS FADER ASSIGN (A, THRU, B)] is set

to [THRU].

7 Turn the [MASTER] control.

Audio signals are output from the [MASTER1] and [MASTER2] terminals.

The master level indicator lights.

Adjusting the sound quality

Turn the [EQ/ISO (HI, MID, LOW) ] controls for the individual

channels.

Refer to Specifications on page 28 for the range of sound that can be adjusted by

each control.

 Switching the [EQ/ISO (HI, MID, LOW)] function.

Switch the [CH EQ (ISOLATOR, EQ)] switch.

— [ISOLATOR]: The isolator function is set. The indicator lights.

— [EQ]: The equalizer function is set.

Monitoring sound with headphones

1 Connect headphones to the [PHONES] jack.

2 Press [CUE] for the channel to be monitored.

3 Switch the [MONO SPLIT, STEREO] switch.

— [MONO SPLIT]: The sound of the channel for which [CUE] is pressed is

output from the headphones output’s left channel, while the sound of

[MASTER] is output from the right channel.

— [STEREO]: The sound of the channel for which [CUE] is pressed is output

in stereo from the headphones.

4 Turn the [MIXING] control.

This adjusts the balance of the monitor volume between the sound of the channel

for which [CUE] is pressed and the [MASTER] channel sound.

5 Turn the [LEVEL] control for [HEADPHONES].

Sound is output from the headphones in the channel selected by [CUE].

! Monitoring is canceled when [CUE] is pressed again.

! When [LIVE SAMPLER] is turned on, [CUE] button for the TOUCH PANEL

EFFECT and [CUE] button for the [LINK] cannot be pressed simultaneously.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DJM-2000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 24,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DJM-2000 Manual

Product: