168886
35
Zoom out
Zoom in
Previous page
1/75
Next page
WARNING
! To prevent accidents, never carry out auto TA
and EQ while driving. When this function
measures the car interior acoustic character-
istics to create an auto-equalizer curve, a loud
measurement tone (noise) may be outputted
from the speakers.
! Be sure to connect the high-range speakers to
the high range output. If the speakers are not
connected correctly, they may be damaged by
the low frequency measurement tone.
CAUTION
! Carrying out auto TA and EQ under the follow-
ing conditions may damage the speakers. Be
sure to check the conditions thoroughly be-
fore carrying out auto TA and EQ.
When speakers are incorrectly connected.
(e.g., When a mid-range speaker is con-
nected to a subwoofer output.)
When a speaker is connected to a power
amp delivering output higher than the
speakers maximum input power capabil-
ity.
! If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in a drain on battery power. Be sure
to place the microphone in the specified loca-
tion.
! When tweeters and super-tweeters are con-
nected to this system, be sure to use the
super-tweeters cross-over network.
! When tweeters and super-tweeters are con-
nected to this system, auto-time alignment
and auto-equalizing may not operate properly.
In this case, manual adjustment is needed.
Before operating the auto TA
and EQ function
! Check the speakers usable frequency
range. Then connect the proper speakers to
high, mid, low or subwoofer outputs. If the
speakers are not connected correctly, auto-
time alignment and auto-equalizing may
not perform properly.
! Carry out auto TA and EQ in as quiet a
place as possible, with the car engine and
air conditioning switched off. Also cut
power to car phones or portable telephones
in the car, or remove them from the car be-
fore carrying out auto TA and EQ. Sounds
other than the measurement tone (sur-
rounding sounds, engine sound, tele-
phones ringing etc.) may prevent correct
measurement of the car interior acoustic
characteristics.
! Be sure to carry out auto TA and EQ using
the supplied microphone. Using another
microphone may prevent measurement, or
result in incorrect measurement of the car
interior acoustic characteristics.
! When the speakers activated in the initial
setting menu are not connected, auto TA
and EQ cannot be carried out.
! When the mid range speaker units are
muted, auto TA and EQ cannot be carried
out. (Refer to the next page.)
! When this unit is connected to a power
amp with input level control, auto TA and
EQ may not be possible if you lower power
amp input level. Set the power amps input
level to the standard position.
! When this unit is connected to a power
amp with an LPF, turn off the LPF on the
power amp before carrying out auto TA and
EQ. In addition, the cut-off frequency for
built-in LPF of an active subwoofer should
be set to the highest frequency.
! The time alignment value calculated by
auto TA and EQ may differ from the actual
distance in the following circumstances.
However, the distance has been calculated
by computer to be the optimum delay to
give accurate results for the circum-
stances, so please continue to use this
value.
When the reflected sound within a vehi-
cle is strong and delays occur.
Audio Adjustments
En
35
Section
03
Audio Adjustments
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer dex p99rs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer dex p99rs in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer dex p99rs

Pioneer dex p99rs Installation Guide - English - 99 pages

Pioneer dex p99rs User Manual - German - 89 pages

Pioneer dex p99rs Installation Guide - German - 99 pages

Pioneer dex p99rs User Manual - Dutch - 85 pages

Pioneer dex p99rs Installation Guide - Dutch - 99 pages

Pioneer dex p99rs User Manual - Danish - 254 pages

Pioneer dex p99rs Installation Guide - French, Italian - 99 pages

Pioneer dex p99rs User Manual - Portuguese - 66 pages

Pioneer dex p99rs User Manual - Swedish - 254 pages

Pioneer dex p99rs User Manual - Turkish - 66 pages

Pioneer dex p99rs Installation Guide - Spanish - 99 pages

Pioneer dex p99rs User Manual - Norwegian, Finnish - 254 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info