168886
27
Zoom out
Zoom in
Previous page
1/75
Next page
Operation modes
This units 4-way network DSP lets you create
a 4-way multi-amp, multi-speaker system with
separate speakers for reproduction of high,
middle, low and ultra-low frequencies (bands),
each driven by a dedicated power amp. The 4-
way network mode provides network and time
alignment functions. These two functions are
essential for a multi-amp, multi-speaker sys-
tem to enable precise control over settings for
each frequency range.
Important
Even when the battery is disconnected or the mi-
croprocessor is reset, this units audio setting re-
mains in the memory. If you want to reset the
audio setting, refer to Resetting the audio func-
tions on page 41.
Note
If one subwoofer is used with this system, left
and right channel adjustment values, such as
time alignment and network settings, need to be
the same.
Adjusting the audio easily
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Using the position selector (POSI)
2 Auto TA and EQ (auto-time alignment and auto-
equalizing)
3 Using balance adjustment on the next page
(BAL)
Adjusting the audio finely
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field.
1 Adjusting the time alignment (TA2)
2 Adjusting network (NW 1, NW 2, NW 3)
3 Fine-adjusting equalizer curve (EQ 2)
Extra functions
These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
! Recalling or copying equalizer curves (EQ 1)
! Adjusting loudness (LOUD)
! Using the sound retriever (S.Rtrv)
! Adjusting source levels (SLA)
Introduction of audio
adjustments
1 Audio display
Shows the audio adjustment status.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
BAL (balance adjustment)POSI (position se-
lector)NW 1 (network adjustment 1)NW 2
(network adjustment 2)NW 3 (network ad-
justment 3)TA1 (time alignment setting)
TA2 (time alignment adjusting)EQ 1 (copy-
ing/recalling the equalizer)EQ 2 (31-band
graphic equalizer)A.EQ (auto-equalizer on/
off)S.Rtrv (advanced sound retriever)
LOUD (loudness)SLA (source level adjust-
ment)
# When selecting FM as the source, you cannot
switch to SLA.
# When selecting FLAT in EQ 1, you cannot
switch to EQ 2.
# When selecting OFF in TA1, you cannot
switch to TA2.
# To return to the display of each source, press
B.
Audio Adjustments
En
27
Section
03
Audio Adjustments
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer dex p99rs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer dex p99rs in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer dex p99rs

Pioneer dex p99rs Installation Guide - English - 99 pages

Pioneer dex p99rs User Manual - German - 89 pages

Pioneer dex p99rs Installation Guide - German - 99 pages

Pioneer dex p99rs User Manual - Dutch - 85 pages

Pioneer dex p99rs Installation Guide - Dutch - 99 pages

Pioneer dex p99rs User Manual - Danish - 254 pages

Pioneer dex p99rs Installation Guide - French, Italian - 99 pages

Pioneer dex p99rs User Manual - Portuguese - 66 pages

Pioneer dex p99rs User Manual - Swedish - 254 pages

Pioneer dex p99rs User Manual - Turkish - 66 pages

Pioneer dex p99rs Installation Guide - Spanish - 99 pages

Pioneer dex p99rs User Manual - Norwegian, Finnish - 254 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info