454472
6
Zoom out
Zoom in
Previous page
1/69
Next page
Introduction of DSP
adjustments
1
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1Setting the speaker setting
2Using the position selector
3Auto TA and EQ (auto-time alignment and auto-
equalizing)
4Adjusting the time alignment
5Adjusting the speaker output levels using a
test tone
6Selecting a cross-over frequency
7Adjusting the speaker output levels
8Adjusting 3-band parametric equalizer
1DSP display
Shows the DSP function names.
%Touch A.MENU and then touch DSP to
display the DSP function names.
The DSP function names are displayed and
operable ones are highlighted.
#When A.MENU is not displayed, you can dis-
play it by touching the screen.
#You can also display MENU by clicking the
joystick.
#To go to the next group of function names,
touch NEXT.
#To return to the previous group of function
names, touch PREV.
#When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION,AUTO EQ and AUTO TA will be can-
celled.
#When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speaker only.
#When selecting the FM tuner as the source,
you cannot switch to SLA.
#When playing other than the DVD disc, you
cannot switch to D.R.C.
#When neither FRONT-L nor FRONT-R is se-
lected in POSITION, you cannot switch to
TIME ALIGNMENT.
#To return to the previous display, touch BACK.
#To return to the display of each source, touch
ESC.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using the sound field control
The SFC function creates the sensation of a
live performance.
!The acoustics of different performance en-
vironments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or re-
verberations. Those factors are programed
into the SFC circuitry to recreate the acous-
tics of various performance settings.
1 Press EQ and hold to switch to SFC
function.
Press EQ and hold until SFC appears in the
display.
Digital Signal Processor
En
6
Section
03
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DEQ-P6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DEQ-P6600 in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DEQ-P6600

Pioneer DEQ-P6600 User Manual - Dutch, French, Italian - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info