Manual Pioneer DEH-X8500BT (page 25 of 44) (English)

525990

Zoom out

Zoom in

1/44

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are stored in Custom1 or Custom2.

! Custom1 can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

! USB, iPod, SD, and Apps (iPhone)

! BT Audio, and Apps (Android)

! Custom2 is a shared setting used in common for

all sources.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Equalizer band—Equalizer level

3 Turn M.C. to select the desired setting.

Equalizer band: 100Hz—315Hz—1.25kHz—

3.15kHz—8kHz

Equalizer level: +6 to –6

Loudness (loudness)

Loudness compensates for deficiencies in the low-fre-

quency and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn loudness on or off.

3 Turn M.C. to select the desired setting.

Low (low)—Mid (mid)—High (high)

Subwoofer1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output which

can be turned on or off.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn subwoofer output on or off.

3 Turn M.C. to select the phase for the subwoofer

output.

Turn M.C. to the left to select reverse phase, and

Reverse appears in the display. Turn M.C. to the

right to select normal phase, and Normal appears

in the display.

Subwoofer2 (subwoofer adjustment)

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the cut-off frequency

and the output level for the subwoofer.

3 Turn M.C. to select the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

4 Turn M.C. to adjust the output level for the sub-

woofer.

+6 to –24 is displayed as the level is increased or

decreased.

Bass Booster (bass boost)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or de-

creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo-

fer output frequency range to play from the front or

rear speakers, turn on the HPF (high pass filter). Only

frequencies higher than those in the selected range

are output from the front or rear speakers.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn high pass filter on or off.

3 Turn M.C. to select the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent sudden changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

! The MW/LW volume level can also be adjusted

with this function.

! Each of the below combinations are set to the

same setting automatically.

! USB, iPod, SD, and Apps (iPhone)

! BT Audio, and Apps (Android)

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

Using different

entertainment displays

You can enjoy entertainment displays while lis-

tening to each sound source.

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select ENTERTAINMENT.

Section

Using this unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DEH-X8500BT in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DEH-X8500BT

Pioneer DEH-X8500BT Installation Guide - English, German - 32 pages

Pioneer DEH-X8500BT User Manual - German - 52 pages

Pioneer DEH-X8500BT Installation Guide - Dutch - 32 pages

Pioneer DEH-X8500BT User Manual - Dutch - 48 pages

Pioneer DEH-X8500BT Installation Guide - French, Italian, Spanish - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DEH-X8500BT Manual

Product: