Manual Pioneer DEH-X6500DAB (page 5 of 152) (English, German, Dutch, French, Italian, Spanish)

491830

Zoom out

Zoom in

1/152

Pausing

You can use the pause function to temporarily

stop listening to a DAB.

% Press DAB to pause or resume.

! This unit stores recent broadcasts to memory

automatically. The memory capacity of this

unit will vary depending on the bit rate of the

Service Component used. The approximate

memory capacity is five minutes for 192 kbps.

! If the duration that a selection is paused ex-

ceeds the length of the memory capacity,

playback will resume from the beginning of

the selection in memory.

This function is disabled while time shift is on.

For more details about time shift, refer to Listen-

ing to a recent broadcast (time shift) on this

page.

Storing and recalling stations

for each band

Using preset tuning buttons

1 When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1/

to 6/ ) and hold until

the preset number stops flashing.

2 Press one of the preset tuning buttons

(1/

to 6/ ) to select the desired station.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! SERVICE LABEL (service label or channel)

! BRDCST INFO (service label/PTY label/en-

semble label/channel and frequency)

! DYNAMIC LABEL (dynamic label)

! CLOCK (source name and clock)

Notes

! If the service label cannot be acquired in

SERVICE LABEL, the channel is displayed in-

stead. If the service label is detected, the

service label will be displayed.

! BRDCST INFO text information will change

automatically.

! For more details about PTY list, refer to PTY

list on the next page.

! This function is disabled while pausing. For

more details about pausing, refer to Pausing

on this page.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Listening to a recent broadcast

(time shift)

You can navigate through recent broadcasts

from the selected Service Component.

1 Press

/DIMMER to switch to time shift

mode.

Press again to resume the live broadcast.

2 Press c or d to adjust the playback point.

! Press c to skip back one minute.

! Press d to skip forward one minute.

This unit stores recent broadcasts to memory

automatically. The memory capacity of this unit

will vary depending on the bit rate of the Service

Component used. The approximate memory ca-

pacity is five minutes for 192kbps.

Stored selections that are older than what can

be stored in the memory will not be available.

Selecting a Service Component

You can select a Service Component from the

following service list.

1 Press

(list) to switch to the service list

mode.

2 Turn M.C. to change the service list and

press to select.

Once selected, the following Service Component

functions can be adjusted.

SERVICE (service label)

You can select a Service Component from the list

of all components.

1 Turn M.C. to select a Service Component.

2 Press M.C. to receive a broadcast from the se-

lected Service Component.

Using alphabet search

1 Press

(list).

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

4 Turn M.C. to select a Service Component.

5 Press M.C. to receive a broadcast from the se-

lected Service Component.

PROGRAM TYPE (PTY label)

You can select a Service Component from PTY in-

formation.

1 Turn M.C. to scroll to the desired PTY informa-

tion and press it to select.

NEWS/INFO—POPULAR—CLASSICS—

OTHERS

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

ENSEMBLE (ensemble label)

You can select a Service Component from the rele-

vant ensemble.

1 Turn M.C. to scroll to the desired ensemble

and press it to select.

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

Updating service list information

You can receive updates to the service list.

% Press and hold down

(list).

To cancel, press

(list) again.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

Once selected, the function below can be ad-

justed.

S.FOLLOW (alternative Service Component

search)

If the tuner cannot get good reception, the unit

will automatically search for another ensemble

that supports the same Service Component. If no

alternative Service Component can be found or re-

ception remains poor, this function will automati-

cally switch to an identical FM broadcast.

1 Press M.C. to turn alternative Service Compo-

nent search on or off.

Tuner

Basic operations

Selecting a band

1 Press BAND/

until the desired band (FM1,

FM2,FM3 for FM or MW/LW) is displayed.

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function. For details about the set-

tings, refer to SEEK (left/right key setting) on

page 7.

English

Operating this unit

Section

Operating this unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DEH-X6500DAB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DEH-X6500DAB Manual

Product: