23
A Title (English)
Display Modes
This function can be used to scroll through the various display modes for Frequency,
Program Service Name and PTY Information.
• Select the desired display mode.
Each press of the DISPLAY button changes the display in the following order:
PTY Information = Program Service Name = Frequency only
TA Function
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activat-
ed for a TP station (a station that broadcasts traffic information).
Activating/Deactivating the TA Function
1. Tune in a TP station.
The TP indicator “ ” lights when the tuner is tuned to a TP station.
2. Activate the TA function.
The “ ” indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the AM band.
• In sources other than tuner, the tuner automatically seeks out the TP station with the strongest sig-
nal in the current area 10 seconds after the TP indicator “ ” disappears from the display. (During
seek operation, the TP indicator “ ” flashes.)
• Only TP stations are tuned in during the Seek Tuning mode when the “ ” indicator is ON.
• Only TP stations are stored by BSM when the “ ” indicator is ON.
Hold for 2 seconds
Each press changes the Display ...
Using RDS Functions
”“
“”
