09
Sezione
2 Premendo 5/∞ è possibile modificare
l’impostazione di uscita posteriore.
Premendo 5/∞ si alterna l’impostazione Rear
SP:FULL (altoparlanti a gamma completa) e
Rear SP:S.W (subwoofer) e il relativo stato viene
visualizzato sul display.
Note
• Se all’uscita posteriore non si trova collegato
alcun subwoofer, selezionare la posizione
Rear SP:FULL.
• Se all’uscita posteriore si trova collegato un
subwoofer, selezionare la posizione Rear
SP:S.W per il subwoofer.
• Se la posizione prescelta per l’uscita posteriore
è Rear SP:S.W, il comando del subwoofer non
può essere modificato.
3 Premendo 2/3 è possibile modificare il
comando di subwoofer.
Premendo 2/3 si alterna l’impostazione S.W
Control :INT e S.W Control :EXT e sul display
viene visualizzato lo stato corrente.
Commutazione del modo
Telefonia a viva voce
È possibile attivare/disattivare la modalità
telefonia a viva voce in funzione dei
collegamenti del telefono cellulare usato.
Se si usa il dispositivo “VIVA VOCE” (venduto
separatamente) selezionare Hands-Free:ON
(VIVA VOCE ATTIVATO).
1 Premere FUNCTION per selezionare TEL1.
Premere più volte FUNCTION finché sul display
appare l’indicazione Hands-Free.
2 Attivare o disattivare TEL1 con 5/∞.
Premendo 5/∞ si attiva o disattiva la funzione
Hands-Free e sul display viene visualizzato lo
stato corrente (p. es. Hands-Free:ON).
Commutazione Silenziamento/
Attenuazione del telefono
Quando si fa o si riceve una chiamata utiliz-
zando un telefono cellulare collegato a questo
prodotto, è possibile selezionare tra silenzia-
mento e attenuazione quando si utilizza l’unità
telefono a viva voce (quando Hands-Free:OFF è
selezionato).
1 Premere
FUNCTION
per selezionare TEL2.
Premere più volte
FUNCTION finché sul display
appare l’indicazione Telephone.
2 Premendo 2/3 è possibile scegliere tra le
funzioni silenziamento/attenuazione del
telefono.
Premendo 2/3 si alternano Telephone :ATT
(attenuazione) e Telephone :MUTE
(silenziamento) e sul display viene visualizzato
lo stato corrente.
Commutazione del modo
Standby (attesa) telefono
Se si desidera usare il dispositivo Viva voce
senza far funzionare altre sorgenti di
quest’apparecchio, attivare il modo Standby
(attesa) telefono.
1 Premere
FUNCTION per selezionare TEL2.
Premere più volte FUNCTION finché sul display
appare l’indicazione TELstandby.
2 Attivare o disattivare TEL2 con 5/∞.
Premendo 5/∞ si attiva o disattiva la funzione
TELstandby e sul display viene visualizzato lo
stato corrente (p. es. TELstandby:ON).
Nota
• È possibile selezionare il modo Standby
(Attesa) telefono quando
Hands-Free:ON è
stato selezionato nel modo Telefonia a viva
voce.
Impostazioni iniziali
It
44