Manual Pioneer DEH-6300SD (page 5 of 136) (English, German, Dutch, French, Italian, Spanish)

454467

Zoom out

Zoom in

1/136

Menu operations identical

for function settings/audio

adjustments/initial settings/

lists

Returning to the previous display

Returning to the previous list/category (the folder/

category one level higher)

1 Press

/DISP/SCRL.

Returning to the main menu

Returning to the top tier of the list/category.

1 Press and hold

/DISP/SCRL.

Returning to the ordinary display

Canceling the initial setting menu

Returning to the ordinary display from the list/cat-

egory

1 Press BAND/ESC.

Tuner

Basic Operations

Selecting a band

1 Press BAND/ESC until the desired band (FM1,

FM2, FM3 for FM or MW/LW) is displayed.

Manual tuning (step by step)

1 Push M.C. left or right.

Seeking

1 Push and hold M.C. left or right, and then re-

lease.

You can cancel seek tuning by pushing M.C.

left or right.

While pushing and holding M.C. left or right,

you can skip stations. Seek tuning starts as

soon as you release M.C.

Note

This unit’s AF (alternative frequencies search)

function can be turned on and off. AF should be

off for normal tuning operation (refer to the next

page).

Using PI Seek

If the tuner cannot find a suitable station, or the

reception status deteriorates, the unit automati-

cally searches for a different station with the

same programming. During the search, PI seek

is displayed and the sound is muted.

Using Auto PI Seek for preset

stations

When preset stations cannot be recalled, the

unit can be set to perform PI Seek during preset

recall.

! The default setting for Auto PI Seek is off.

Refer to AUTO PI (auto PI seek) on page 10.

Storing and recalling stations

for each band

Using preset tuning buttons

1 When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

2 Press one of the preset tuning buttons (1

to 6) to select the desired station.

# You can also recall stored radio stations by push-

ing M.C. up or down during the frequency display.

Using the preset screen

1 Press to switch to the preset screen.

2 Use M.C. to store the selected frequency

in the memory.

Turn to change the preset number. Press and

hold to store.

3 Use M.C. to select the desired station.

Turn to change the station. Press to select.

Switching the RDS display

RDS (radio data system) contains digital infor-

mation that helps search for the radio stations.

% Press

/DISP/SCRL.

Program service name—PTY information—Fre-

quency

# PTY information and the frequency appear on the

display for eight seconds.

PTY list

NEWS/INFO

NEWS (News), AFFAIRS (Current affairs), INFO

(Information), SPORT (Sports), WEATHER (Weath-

er), FINANCE (Finance)

POPULAR

POP MUS (Popular music), ROCK MUS (Rock

music), EASY MUS (Easy listening), OTH MUS

(Other music), JAZZ (Jazz), COUNTRY (Country

music), NAT MUS (National music), OLDIES

(Oldies music), FOLK MUS (Folk music)

CLASSICS

L. CLASS (Light classical), CLASSIC (Classical)

OTHERS

EDUCATE (Education), DRAMA (Drama), CUL-

TURE (Culture), SCIENCE (Science), VARIED (Var-

ied), CHILDREN (Children’s), SOCIAL (Social

affairs), RELIGION (Religion), PHONE IN (Phone

in), TOURING (Travel), LEISURE (Leisure), DOCU-

MENT (Documentaries)

Advanced operations using

special buttons

Receiving traffic announcements

Regardless of the source you are listening to, you

can receive traffic announcements automatically

with TA (traffic announcement standby).

1 Tune in to a TP or enhanced other network’s

TP station.

2 Press TA/NEWS to turn traffic announcement

standby on or off.

3 Use M.C. to adjust the TA volume when a traf-

fic announcement begins.

The newly set volume is stored in the memory

and will be recalled for subsequent traffic an-

nouncements.

4 Press TA/NEWS while a traffic announcement

is being received to cancel the announce-

ment.

The tuner returns to the original source but re-

mains in the standby mode until TA/NEWS is

pressed again.

Using news program interruption

When a news program is broadcast from a PTY

code news station, the unit automatically switches

to the news broadcast station. When the news

program ends, reception of the previous program

resumes.

1 Press and hold TA/NEWS to turn news pro-

gram interruption on or off.

A news program can be canceled by pressing

TA/NEWS.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

English

Operating this unit

Section

Operating this unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DEH-6300SD in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DEH-6300SD Manual

Product: