491980
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
En
Operation (other functions)
Adjusting the jog dial’s MIDI
message sending interval
This unit is equipped with a mode for adjusting the jog dial’s MIDI mes-
sage sending interval.
Depending on your computer’s operating system and specifications, the
jog dial may not operate properly if the sending interval of MIDI mes-
sage for JOG dial is too short. In this case, follow the procedure below to
adjust the MIDI message sending interval.
! The value set in the jog dial MIDI message sending interval adjust-
ment mode is retained even when this unit’s power is turned off.
1 Turn on the power while pressing the right deck’s
[CTRL A] button and [FX1] button.
The unit starts up in the jog dial MIDI message sending interval adjust-
ment mode. Wait until the startup illumination finishes.
2 Press the [SHIFT] button and select the jog dial’s MIDI
message sending interval.
The sending internal changes in units of 1 ms each time the [SHIFT]
button is pressed.
The jog dial’s MIDI message sending interval is indicated by how the
LEDs on the channel level indicator light.
MIDI message
sending interval
Channel Level Indicator
3 ms*
4 ms
5 ms
6 ms
7 ms
8 ms
9 ms
10 ms
11 ms
12 ms
13 ms
*: Setting upon purchase
! When the [PLAY/PAUSE] button is pressed, the jog dial MIDI mes-
sage sending interval adjustment mode is canceled.
Adjusting the sensitivity of the jog
dial’s touch sensor
This unit is equipped with a mode for adjusting the sensitivity of the jog
dial’s touch sensor.
! The value set in the jog dial sensitivity adjustment mode is retained
even when this unit’s power is turned off.
1 Turn on the power while pressing the left deck’s
[CTRL A] and [FX1] buttons.
The unit starts up in the jog dial sensitivity adjustment mode. Wait until
the startup illumination finishes.
2 Press the [SHIFT] button to select the jog dial’s
sensitivity.
The jog dial’s sensitivity changes each time the [SHIFT] button is
pressed.
The jog dial’s sensitivity is indicated by how the
[HOT CUE (DELETE)/SAMPLER] buttons and [SAMPLER] LEDs light.
Jog dial
sensitivity
LED that lights
–4 (low) Left deck’s [HOT CUE1] button
–3 Left deck’s [HOT CUE2] button
–2 Left deck’s [HOT CUE3] button
–1 Left deck’s [HOT CUE4] button
0* Left and right decks’ [SAMPLER] button
+1 Right deck’s [HOT CUE1] button
+2 Right deck’s [HOT CUE2] button
+3 Right deck’s [HOT CUE3] button
+4 (high) Right deck’s [HOT CUE4] button
*: Setting upon purchase
! The jog dial sensitivity adjustment mode is canceled when the
[PLAY/PAUSE] button is pressed.
Mood lighting mode
When this mode is set, the brightness of the illumination of the left and
right jog dials automatically changes slowly. This can be used as mood
lighting.
! This mode can be set even if no DJ application is running.
Launching the mood lighting mode
Press the [SHIFT], [DECK C] and [DECK D] buttons simultaneously.
! The mood lighting mode is set automatically if no operation is per-
formed for 10 minutes.
Canceling the mood lighting mode
Operate any one of the control panel’s buttons, controls, sliders, jog
dials, etc.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DDJ-WeGO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DDJ-WeGO in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DDJ-WeGO

Pioneer DDJ-WeGO User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info