707081

Pioneer DDJ-SB3 Manual

9
Zoom out
Zoom in
Previous page
1/108
Next page
9
En
English
Playing a track
The following describes the procedure for outputting the channel 1
sound as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
1 TRIM control
Turned fully counterclockwise
2 EQ (HI, MID, and LOW) controls
12 o’clock position
3 FILTER control
12 o’clock position
4 Channel fader
Minimum (lowest) position
5 MASTER LEVEL control
Turned fully counterclockwise
6 Crossfader
Center position
2 Press the [f] button to play the track.
3 Turn the [TRIM] control.
Adjust the [TRIM] control so that the channel level indicator’s orange
indicator lights at peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
6 Turn the [HEADPHONES LEVEL] control to adjust the
audio level of the headphones.
The [HEADPHONES CUE MASTER] select button must be set to ON to
monitor through the headphones.
It is recommended to set the control between the 9 and 10 o’clock
positions.
About the controls’ setting values
The setting values of the controls, etc., below are controlled individually
for the respective decks in the Serato DJ Lite software.
• TRIM control
• EQ (HI, MID, LOW) controls
• FILTER control
• Channel fader
• TEMPO slider
If the values controlled by Serato DJ Lite when the decks are switched
differ from the positions of this unit’s controls, faders, etc., the controls,
faders, etc., must be moved to the positions corresponding to the values
controlled by Serato DJ Lite before they will operate.
• The initial settings of decks 3 and 4 of Serato DJ Lite are the center
position for the [TRIM] control, [EQ (HI, MID, and LOW)] controls,
and [FILTER] control, ±0.0% for the [TEMPO] slider, and the
minimum (lowest) position for the channel fader.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DDJ-SB3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DDJ-SB3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info