61213
49
Zoom out
Zoom in
Previous page
1/106
Next page
Additional information 11
49
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Error Messages
No HDMI video output. • Make sure that you’ve selected this player as the HDMI input in the settings for
the component you’re using (refer to the component’s instruction manual).
• Check that the HDMI cable is connected properly and isn’t damaged.
• Check that components connected using the HDMI interface are switched on
and HDMI compatible (components must be compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP)).
• Depending on the component you have connected, using a DVI connection may
result in unreliable signal transfers.
• Make sure the resolution on this player matches that of the component you have
connected using HDMI. See Video Output settings on page 30 to change the HDMI
resolution.
• If the screen goes blank after changing the resolution, it means the you selected
a resolution incompatible with your monitor. See Resetting the HDMI connection
on page 36 to reset to the factory defaults.
Color problems occur
with your monitor after
changing the
HDMI
Color
setting (page 31).
• Depending on the connected equipment, some HDMI Color settings may cause
the picture to be displayed incorrectly. In this case, use the TV’s own video input
settings to select RGB, if possible. Alternatively, revert to the previous HDMI Color
setting.
Problem Remedy
Message Description
2CH ONLY • An operation is prohibited because it is only applicable to 2 channel sources,
while the current source is a multichannel source.
96K • An operation is prohibited because the source is 96 kHz digital.
REC MODE • An operation is prohibited because the Recording mode is on (page 35).
SND.DEMO • The sound demo is on. See General in Troubleshooting on page 46.
NOISY • Background noise is too high to complete MCACC setup successfully.
ERR MIC • An error occured during MCACC setup because the microphone is not
connected or is not connected properly.
ERR SP • An error occured during MCACC setup because the speakers are not connected
or are not connected properly.
MUTING • An operation is prohibited because the sound is muted (press MUTE).
STEREO An operation is prohibited because the tuner is selected.
TRAYLOCK The tray lock is on. See General in Troubleshooting on page 46.
KEYLOCK The key lock is enabled. See Key lock setting on page 39.
PHONESIN • An operation is prohibited because the headphones are connected.
HDMI ERR • See HDMI connection above for troubleshooting tips. See also Resetting the
HDMI connection on page 36 if the problem persists.
USB ERR • See Important in Using the USB interface on page 25 for more on this.
DCS-575_580DVD_EN.book 49 ページ 2008年2月29日 金曜日 午後5時43分
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DCS-575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DCS-575 in the language / languages: English, French as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DCS-575

Pioneer DCS-575 User Manual - German - 106 pages

Pioneer DCS-575 User Manual - Dutch - 106 pages

Pioneer DCS-575 User Manual - Danish - 172 pages

Pioneer DCS-575 User Manual - Italian - 106 pages

Pioneer DCS-575 User Manual - Portuguese - 46 pages

Pioneer DCS-575 User Manual - Swedish - 172 pages

Pioneer DCS-575 User Manual - Turkish - 44 pages

Pioneer DCS-575 User Manual - Spanish - 106 pages

Pioneer DCS-575 User Manual - Norwegian, Finnish - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info