573841
37
Zoom out
Zoom in
Previous page
1/60
Next page
Singing karaoke 09
37
En
Chapter 9
Singing karaoke
Singing karaoke
Using the karaoke features you can plug in a
microphone and mix the sound of your own
voice with a backing track
1
. You can select a
backing track from audio sources such as CDs,
DVDs, VCDs or USB devices. Adjust the
microphone level relative to the backing track.
1 Set the MIC VOL knob (front panel) to
minimum.
2 Plug in the microphone(s).
If you’re only using one mic, plug it into the
MIC (MAIN) jack. The MIC (SUB) jack can be
used only if MIC (MAIN) is also connected.
If the microphone has an on/off switch,
make sure it’s on.
3 Load a karaoke backing disc.
4 To change the mix (CD or Video CD/Super
VCD only), press
KARAOKE
.
Press to switch between these options:
2
KARAOKE (Vocal cancel) – Backing track
vocals are partially eliminated using EQ.
L CH – Left channel only. Use for tracks
that have a vocal recorded in the right
channel.
R CH Right channel only. Use for tracks
that have a vocal recorded in the left
channel.
L+R CH – Use to put a single-channel vocal
track into the center of the mix.
OFF – Switches the Karaoke mode off.
5 Play the backing track.
6 Adjust the MIC VOL knob.
To avoid unpleasant feedback, make sure you
don’t point the microphone(s) at the speakers.
3
7 Sing!
Changing the vocal mix
Adding some effects to the microphone mix
can sometimes improve the overall sound.
4
You can choose between three echo levels.
To add effects to the microphone mix,
press ECHO.
Pressing repeatedly switches between echo
levels 1 to 3 and off.
Changing the backing track
You may want to lower or raise the pitch of the
backing track to match your vocal range.
5
Press KEY CONTROL
(SHIFT+KARAOKE) or (SHIFT+ECHO) to
raise or lower the pitch of the backing track.
Note
1 • These features are only possible when a microphone is connected. If you try to use KARAOKE, ECHO, (SHIFT+KARAOKE),
or (SHIFT+ECHO) when no mic is connected, a ’NO MIC’ error message is displayed. Also note that during DVD playback, when
you connect a mic sound settings are automatically switched to STEREO playback and downmixes multichannel sources to 2.1
channels.
• These features are only available with the DVD/CD or USB input functions.
2 The current setting is first shown in the display.
MAIN MIC SUB
MIN MAX
MIC VOL
3 Depending on the microphone level, the sound of the disc may distort. If this happens, turn down the volume.
4 You cannot adjust Sound menu, SFC modes or bass boost controls when a microphone is plugged in.
5 This feature is not compatible with DTS signals.
CX303_505_500.book Page 37 Wednesday, June 27, 2007 2:39 PM
Downloaded from www.Manualslib.com manuals search engine
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CX500 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info