572157

Pioneer CT-L77 Manual

16
Zoom out
Zoom in
Previous page
1/48
Next page
4 Switching On
16
Switching On and Setting the Clock
If you've followed the manual to here, you should now have your system installed with
everything connected up and plugged in. This chapter takes you through using the
basic features: playing CDs and tapes, listening to radio stations, and adjusting the
volume, tone and balance to get the sound you want.
First of all, we'll set the clock. This is mainly used for timer functions, such as the
sleep timer, though you can also use the display as a clock. Unless you unplug the
unit, or there's a power failure, you only need to set the clock once.
1 Switch on.
You can use the STANDBY/ON button on either the remote control or the
CD receiver unit to do this.
The display lights and briefly indicates the current volume level before
showing the current function (e.g. CD).
2 Press TIMER.
3 Press SET.
The display changes to show a date and time, with the day part of the date
flashing to indicate that you can set it.
4 Use the $ and › buttons to set the
correct day of the month, then press SET.
Once you’ve pressed SET, the month will start flashing.
5 In the same way, set the rest of the date
and time.
Each time you press SET, the next part of the date/time will start flashing.
Adjust using the $ and › buttons.
Pressing
SET after setting the minute completes the clock setup.
Note: The time is in 24-hour clock format (i.e., 13:00 is 1pm).
Correct time and date after
setting
Display shows the CD player as
the current function (no disc
loaded)
day / month / year
hour : minute
Remember: If power is interrupted, the clock display will flash until you reset it to
the correct time. To use the timer features, always set the clock to the correct time.
After setting the day, set the
month
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL
REC
$
! —
›
+
⁄
VOL
STANDBY/ ON
STANDBY/ON
SET TIMER
4
¢
Tip
Press DISPLAY in standby
mode to show the day
and time. The display
remains until you hit the
STANDBY/ON button.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CT-L77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CT-L77 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info