454962
99
Zoom out
Zoom in
Previous page
1/142
Next page
97
Chapter 8 Customising the Audio Source SettingAV
(The navigation map screen can be displayed on
the right-hand side and the camera image can be
displayed on the left.) Please beware that in this
setting, camera image is not resized to fit, but
that a portion of what is seen by the camera is not
viewable.
Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
Confirm the setting immediately whether the
display changes to a rear view camera image
when the gearstick is moved to REVERSE (R)
from another position.
When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
Rear View can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please beware that in this setting,
camera image is not resized to fit, but that a
portion of what is seen by the camera is not
viewable.
Initially, this function is set to OFF.
1 Touch “CAMERA” in the SETUP menu.
2 Touch “CAMERA” to turn reverse camera
setting on.
Touching “CAMERA” switches between
ON” and “OFF”.
Unless this setting is “ON”, you cannot
switch to Rear View mode.
3 Touch “POLARITY” to select an
appropriate setting for polarity.
Each time you touch “POLARITY” switches
between the following polarity:
BATTERY – When the polarity of the
connected lead is positive while the
gearstick is REVERSE (R) position
GND – When the polarity of the connected
lead is negative while the gearstick is
REVERSE (R) position
Selecting the video of rear
display
When the navigation screen is displayed on front,
you can select either showing the navigation
screen on rear display or the video of the selected
source.
The map screen navigation images output to
the rear display differ from standard NTSC
format images. Therefore, their quality will be
inferior to the images that appear on the front
display.
1 Touch “REAR DISP” in the SETUP menu.
Each touch of the “REAR DISP” changes the
settings as follows:
SOURCE – Display the screen of the
selected source on rear display
NAVI Display the navigation video on
rear display when the navigation screen is
displayed on front
When selecting “SOURCE” in “REAR
DISP”, when the selected source is an
audio source, nothing is displayed on rear
display.
When selecting “SOURCE” in “REAR
DISP”, nothing is displayed on rear
display during a traffic announcement
interruption or a news program
interruption.
When selecting Rear View, nothing is
displayed on the left-hand side of the rear
display.
Setting the slide back function
You can adjust the LCD panel slide position to
prevent the display from hitting the gearstick of
an automatic vehicle when it is in P (park)
position.
Please be careful, as the LCD panel will slide
immediately after the setting is turned “ON”.
1 Touch “FLAP SET BACK” in the SETUP
menu.
Touching “FLAP SET BACK” switches
between “ON” and “OFF”.
Other Functions
MAN-CNDV-50MT-EN.book Page 97 Wednesday, May 4, 2005 1:49 PM
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CNDV-50MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CNDV-50MT in the language / languages: English as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer CNDV-50MT

Pioneer CNDV-50MT User Manual - Dutch - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info