161649

Pioneer cdj 800 mk2 Manual

33
Zoom out
Zoom in
Previous page
1/116
Next page
Before Operating (Names and Functions of Parts)Advanced Operations /Démarches évoluées
33
<DRB1400> En/Fr
English
Français
2. Press the SEARCH button (1, ¡) or rotate the jog dial.
The loop-out point will change in one-frame increments.
The loop-out point cannot be moved to a position before the loop-
in point.
In the case of MP3, adjustment of loop positions is possible only
within the same track where cue points are set.
Loop-out point cannot be modified during scratch play.
When the LOOP OUT button is pressed or 30 seconds elapses,
the adjustment mode is canceled and loop play resumes.
* If the loop out-point adjust mode is selected while AUTO BEAT LOOP
8 (1/1) button is lighted, the AUTO BEAT LOOP 8 (1/1) button will
flash and the modified loop-out point will be updated in memory. If the
loop out-point adjust mode is selected while AUTO BEAT LOOP 4, 2
or 1 button is lighted, the loop-out point can be adjusted, but it will not
be updated in memory. If the AUTO BEAT LOOP button is pressed
here to shorten the loop, the playback will revert to 1/8, 1/4, 1/2 or
1/1 loop based on the original loop created before the modification,
when the AUTO BEAT LOOP 8 (1/1) button was lighted.
7 To return to a loop (Reloop)
During playback after leaving a loop, press the RELOOP/EXIT
button.
Playback will return to the loop-in point of the previously set loop, and
loop play will resume.
If auto beat loop has been set, loop play will resume in auto beat loop
mode.
In the case of MP3 playback, reloop cannot be performed to a folder
different from the one currently selected.
Reverse play
Press the REV button. The button indicator will light.
Playback will begin in the reverse direction.
Playback acceleration/deceleration produced with jog dial rotation will
operate in reverse.
Reloop cannot be performed during reverse playback.
Seamless reverse playback cannot be performed with loops of 15
seconds or more.
If track search or loop play are performed, the audio memory status
indicator (jog dial display) will flash for 1 to 2 seconds, and scratch/
reverse operations may be temporarily disabled.
In the case of MP3, reverse play that overlaps multiple folders is not
possible.
During MP3 play, reverse playback may not occur immediately with
some tracks. (The message [Searching] may appear on the display
while play time information is read into the unit before playback starts.)
About fader start play
When the accessory control cord is used to connect this unit’s CONTROL
jack to the corresponding CONTROL jack on a Pioneer DJ mixer, moving
the mixer’s channel fader causes the CUE standby on the CD player to be
released, thus instantly starting playback. The mixer’s cross fader can also
be used to control fader start on the player. Also, when the fader lever is
returned to its original position, the player can be made to return to its cue
point (back cue). For details regarding connection, ☞ P. 13.
* Si le mode de réglage du point final de boucle est sélectionné alors
que le bouton AUTO BEAT LOOP 8 (1/1) est allumé, le bouton AUTO
BEAT LOOP 8 (1/1) clignotera et le point final de boucle modifié sera
mis à jour dans la mémoire. Si le mode de réglage du point final de
boucle est sélectionné alors que le bouton AUTO BEAT LOOP 4, 2 ou
1 est allumé, le point final de boucle pourra être ajusté, mais il ne sera
pas mis à jour dans la mémoire. Si le bouton AUTO BEAT LOOP est
actionné ici pour raccourcir une boucle, la lecture repassera à 1/8, 1/
4, 1/2 ou 1/1 de boucle, en fonction de la boucle originale créée avant
la modification, lorsque le bouton AUTO BEAT LOOP 8 (1/1) était
allumé.
7 Retour à une boucle (Rebouclage)
Pendant la lecture, après avoir quitté une boucle, appuyez
sur le bouton RELOOP/EXIT.
La lecture reviendra au point initial de boucle de la boucle
préalablement définie et la lecture à boucle s’accomplira.
Si une boucle à battement automatique a été définie, la lecture à
boucle reprendra en mode de boucle à battement automatique.
Dans le cas de la lecture MP3, un rebouclage n’est pas possible sur
un dossier différent de celui qui est actuellement sélectionné.
Lecture inversée
Appuyez sur le bouton REV. Le voyant du bouton s’allume.
La lecture commencera dans le sens inverse.
L’accélération / décélération produite par la rotation de la bague Jog
agit en sens inverse.
Un rebouclage n’est pas possible pendant la lecture inverse.
Une lecture inverse sans à-coup n’est pas possible avec des boucles
de 15 secondes ou plus.
Si la recherche de plage ou la lecture de boucle est exécutée,
l’indicateur d’état de la mémoire (affichage de bague Jog) clignote
pendant 1 à 2 secondes et il se peut que les opérations Scratch/
Inversion soient temporairement invalidées.
En cas de lecture MP3, une lecture inverse chevauchant sur plusieurs
dossiers n’est pas possible.
Pendant la lecture MP3, il se peut que la lecture inverse ne soit pas
exécutée immédiatement avec certaines plages. (Il se peut que le
message [Searching] (recherche) apparaisse sur l’affichage pendant
que les informations de la durée de lecture sont lues par l’appareil
avant le début de la lecture.)
À propos de la lecture à départ en fondu
Lorsque le câble de commande fourni comme accessoire raccorde la
prise CONTROL de cet appareil et la prise CONTROL correspondante
d’un mixeur DJ de Pioneer, le déplacement du levier de fondu de canal
sur le mixeur libérera le mode Attente CUE sur le lecteur CD, ce qui
lancera immédiatement la lecture. Le fondu croisé du mixeur permet
aussi de contrôler le départ en fondu sur le lecteur. En outre, si le levier
de fondu est ramené à sa position originale, le lecteur peut être ramené
à son point de repère (retour au point de repère). Pour plus de détails sur
le branchement, ☞ P. 13.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer cdj 800 mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer cdj 800 mk2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info