425039

Pioneer cdj 200s single cd player Manual

28
Zoom out
Zoom in
Previous page
1/92
Next page
OPERATIONS / UTILISATION
28
<DRB1376>
En/Fr
Fader Start Playback
The supplied control cable may be used to connect the CONTROL
connector of the CDJ-200 to the matching CONTROL connector on a
DJM-300, DJM-500, DJM-600, DJM-3000, DJM-909 or DJM-707 DJ
mixer, thus making it possible to exit from cueing standby mode and
start playback immediately by raising the channel fader on the DJ
mixer. The cross fader may also be used to perform fade-in starts on
the player as well. The fader may also be returned to its original posi-
tion to return the player to the cueing point (back cueing). (See P.10
for instructions on connecting the units.)
Relay Play Using Two Players
By using the supplied control cable to connect the CONTROL connec-
tors of two CDJ-200, or other CDJ series CD players, relay play can be
performed. ☞P.10
Set both players’ auto cue function to ON (The [A.CUE] indicators
will light in the displays.)
Set the DJ mixers Cross Fader control to its center position.
1. Begin playback on the first player.
2. When the currently playing track ends, playback will begin
automatically on the standby player.
3. The first player will enter cue pause mode at the beginning
of the next track on its disc.
By repeating this operation, the two players can be used to per-
form continuous relay play.
By loading new discs and choosing desired tracks on the player
in standby, a continuous program of selected tracks can be
played.
By setting a cue point on the standby player, a relay of any
desired cue point of the selected track can be performed.
☞P.24 “Cue Point Settings”
Note:
Relay play may not operate properly if the AUDIO
OUT jacks on the two players are not connected to
the same DJ mixer.
If the power to one player is turned off during its
playback, the other player may begin playback.
Fader start and relay play cannot be performed si-
multaneously, since different control cord connec-
tions are required.
Lecture à départ en fondu
Le câble de commande fourni sert à raccorder le connecteur CON-
TROL du CDJ-200 au connecteur correspondant d’une table de
mixage DJM-300, DJM-500, DJM-600, DJM-3000, DJM-909 ou DJM-
707. Il est alors possible de quitter le mode d’attente à repérage et de
lancer immédiatement la lecture en relevant le potentiomètre de ca-
nal sur la table de mixage DJ. La commande de fondu croisé permet
également d’effectuer des départs en fondu sur le lecteur. Vous
pouvez également ramener le potentiomètre à sa position originale
pour faire revenir le lecteur au point de repérage (pour effectuer un
repérage arrière). (Pour des explications sur le branchement des
appareils, reportez-vous à la page 10.)
Lecture à relais avec deux lecteurs
En raccordant les connecteurs CONTROL de deux CDJ-200 ou de
deux autres lecteurs CD de la série CDJ au moyen du câble de
commande fourni, il est possible d’effectuer une lecture en relais.
(☞p. 10)
Activez la fonction de repérage automatique sur les deux lecteurs.
(le voyant [A.CUE] s’allume sur leur affichage)
Amenez la commande de Fondu croisé des tables de mixage DJ à
sa position centrale.
1. Lancez la lecture sur le premier lecteur.
2. Lorsque la plage en cours s’achève, la lecture commence
automatiquement sur le lecteur en attente.
3. Le premier lecteur se place en mode Pause de repérage au
début de la plage suivante sur son disque.
En répétant ces démarches, les deux lecteurs permettent de
réaliser une lecture à relais en continu.
En plaçant un nouveau disque sur le lecteur en attente, vous
pouvez constituer un programme continu, comportant vos
plages préférées.
En posant un point de repérage sur le lecteur en attente, vous
pouvez effectuer un relais à n’importe quel point de repérage
souhaité sur la plage sélectionnée. (☞p. 24 “Réglage d’un point
de repérage”)
Remarques :
Il se peut que la lecture à relais ne fonctionne pas
correctement si les prises AUDIO OUT des deux
lecteurs ne sont pas raccordées à la même table de
mixage DJ.
Si l’alimentation d’un lecteur est coupée pendant
qu’il effectue la lecture d’une plage, il se peut que
l’autre commence sa lecture.
Le démarrage en fondu et la lecture en relais ne sont
pas possibles simultanément car des branchements
différents des câbles de commande sont nécessaires.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer cdj 200s single cd player at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer cdj 200s single cd player in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info