491982
43
Zoom out
Zoom in
Previous page
1/47
Next page
43
En
Additional information
Additional information
Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to such external causes as static electricity. If this happens, normal operation can sometimes be restored by
turning the power off, waiting for the disc to stop completely, then turning the power back on.
Problem Check Remedy
Disc cannot be ejected. Is [EJECT/LOAD LOCK] set to [LOCK]?
Press the [PLAY/PAUSEf] button to set the pause mode, then press the
[DISC EJECTh] button.
Set [EJECT/LOAD LOCK] at [UTILITY] to [UNLOCK], then press the
[DISC EJECTh] button.
If the [DISC EJECTh] button does not work, insert the pin into the disc force
eject hole to eject the disc.
Playback does not start when disc
is loaded.
Is the disc or file playable? See Usable media on page 5.
Is the auto cue function activated? Press [AUTO CUE] for at least 1 second to turn cancel the auto cue function.
File cannot be played. Is the file copyright-protected (by DRM)? Copyright-protected files cannot be played.
No sound is produced, or sound is
distorted or noisy.
Are you operating the connected DJ mixer
properly?
Check the operation of the DJ mixer.
Is this unit placed near a TV? Turn the TV’s power off or install this unit and TV away from each other.
Loud noise is produced or playback
stops when a certain disc is played.
Is the disc scratched? Scratched discs may not play.
Is the disc dirty? Wipe the dirt off the disc. (page 46)
File information is not properly
displayed.
Is [LANGUAGE] properly set? Set [LANGUAGE] to the proper language.
Is the information recorded in a language not sup-
ported by this unit?
When creating files using DJ software, etc., record the information in a language
supported by this unit.
Track search operation takes too long. Is the auto cue function activated? Track searching may take some time when there are long silent sections
between tracks.
If track searching is not possible within 10 seconds, a cue point is set at the
beginning of the track.
Back cue function does not work. Is a cue point set? Set the cue point (page 26).
Loop play function does not work. Is a cue point set? Set the cue point (page 26).
Settings are not stored in the memory. Has the power been turned off directly after
changing the setting?
After changing settings, wait at least 10 seconds before turning the power off.
USB device is not recognized. Is the USB device properly connected? Connect the device securely (all the way in).
Is the USB device connected via a USB hub? USB hubs cannot be used.
Is the USB device supported by this unit? This player only supports USB mass storage class devices.
This player supports portable flash memory and digital audio playback devices.
Is the file format supported by this unit? Check the file format of the connected USB device. For the file formats sup-
ported by this unit, see About USB devices on page 6.
Turn the power off then back on.
Cue or loop points are not stored on
storage devices (SD, USB).
Are you trying to store more points than the limit? The maximum number of cue or loop points that can be stored on storage
devices (SD, USB) per disc is 100. For devices other than discs, the maximum
limit is 10 points per track.
If you try to store more points than the limit, [CUE/LOOPPOINT FULL] is dis-
played and the points cannot be stored. In this case, delete some points before
storing new ones.
Is the storage device (SD, USB) write-protected? When an SD memory card is write-protected, [CARD PROTECTED] is displayed
and the points cannot be stored. When a USB device is write-protected,
[USB FULL] is displayed and the points cannot be stored. Disable write-protec-
tion then store the points.
Is there enough free space on the storage device
(SD, USB)?
If there is not enough free space on an SD memory card, [CARD FULL] is dis-
played and the points cannot be stored. If there is not enough free space on a
USB device, [USB FULL] is displayed and the points cannot be stored. Free some
space then store the points.
Cue points or loop of tracks stored on
a storage device (SD, USB) are not
displayed.
Was the USB device properly stopped before it
was disconnected the last time?
Points may not be displayed if the SD memory card/USB device is removed
without performing the proper stopping procedure or if this unit’s power is
turned off.
Check that the SD memory card or USB indicator is completely off before dis-
connecting storage devices (SD, USB) or turning this unit’s power off.
When buttons are pressed to call out
the hot cue storing mode or to reloop,
or when the lever is moved to set
reverse playback, the operation does
not start immediately.
Is the quantize function on? When the quantize function is on, the operation starts from the nearest beat
position from where buttons are pressed or the lever is moved. To start the
operation immediately when buttons are pressed or the lever is moved, turn the
quantize function off.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CDJ-2000NXS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CDJ-2000NXS in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer CDJ-2000NXS

Pioneer CDJ-2000NXS Quick start guide - English - 116 pages

Pioneer CDJ-2000NXS Installation Guide - English - 28 pages

Pioneer CDJ-2000NXS Quick start guide - German - 116 pages

Pioneer CDJ-2000NXS User Manual - German - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Dutch - 116 pages

Pioneer CDJ-2000NXS User Manual - Dutch - 49 pages

Pioneer CDJ-2000NXS Quick start guide - French - 116 pages

Pioneer CDJ-2000NXS User Manual - French - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Italian - 116 pages

Pioneer CDJ-2000NXS User Manual - Italian - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Portuguese - 116 pages

Pioneer CDJ-2000NXS User Manual - Portuguese - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Spanish - 116 pages

Pioneer CDJ-2000NXS User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info