491982
28
Zoom out
Zoom in
Previous page
1/47
Next page
28
En
! After calling out a loop stored at a [HOT CUE] button, loop playback
can be canceled using the [RELOOP/EXIT] button and the loop in
and out points can be fine-adjusted using the [LOOP IN(IN ADJUST)]
and [LOOP OUT(OUT ADJUST)] buttons. The adjustment directly
changes the information stored at the [HOT CUE] (A, B or C) button.
Calling out hot cues
Procedure for calling out hot cues (for discs)
To call out hot cues using storage devices (SD, USB), the disc’s hot cues
must first be stored using the storage device (SD, USB).
1 Connect the storage device (SD, USB) on which the
disc’s hot cues are stored.
2 Load a disc in this unit.
The unit switches to the hot cue call-out mode and the [HOT CUE] (A, B
and C) buttons at which hot cues are recorded flash.
3 Press the [HOT CUE] button (A, B or C) whose hot cue
you want to call out.
The hot cue is called out, and the [HOT CUE] (A, B, C) button lights
green or orange.
! If you do not want to call out a hot cue, press the [HOT CUE]
(REC/CALL) button without pressing one of the [HOT CUE] (A, B or
C) buttons. Buttons whose hot cues were not called out turn off.
! When playing tracks recorded on media other than discs, hot
cues cannot be called out even when a disc for which hot cues are
recorded is loaded in the this unit.
! If the hot cue call-out mode is cancelled accidentally, disconnect the
storage device (SD, USB), then reconnect it.
Call-out procedure (storage device (SD, USB))
1 Connect a storage device (SD, USB) to this unit.
2 Load the track whose hot cue you want to call out.
3 Press the [HOT CUE] (REC/CALL) button for over 1
second.
The unit switches to the hot cue call-out mode and the HOT CUE buttons
(A, B and C) at which hot cues are recorded flash.
4 Press the [HOT CUE] button (A, B or C) whose hot cue
you want to call out.
The hot cue is called out, and the [HOT CUE] (A, B, C) button lights
green or orange.
! If you do not want to call out a hot cue, press the [HOT CUE]
(REC/CALL) button without pressing one of the [HOT CUE] (A, B or
C) buttons. Buttons whose hot cues were not called out turn off.
! If the hot cue call-out mode is cancelled accidentally, press the
[HOT CUE] (REC/CALL) button again for more than 1 second.
! rekordbox can be preset so that hot cues are called out automatically
when tracks are loaded.
!
” is displayed on the track list for tracks for which auto hot cue
loading is set.
Canceling the hot cue call out mode
Perform one of the operations below to cancel the hot cue call out mode.
When tracks have been loaded from a disc, the hot cue call-out mode is
not canceled even if the track being played is changed.
1 Calling out hot cues A, B and C.
2 Press the [HOT CUE] (REC/CALL) button.
3 Change the track to be played on the storage device
(SD, USB).
Storing cue or loop points
1 Connect a storage device (SD, USB) to this unit.
2 Set Cue Point or Loop Point.
3 Press the [MEMORY] button.
[ MEMORY] or [ MEMORY] is displayed for several seconds
on the main unit display, and the point information is stored on the stor-
age device (SD, USB).
Stored cue and loop points are indicated [b] at the top of the waveform
display.
! When a track recorded on a disc is playing, if both an SD memory
card and a USB device are connected, the point information is stored
with priority on the SD memory card.
The storage device can be selected using the [MENU] button.
Devices connected to other DJ players connected by PRO DJ LINK
can also be selected.
! To store loop points, press the [MEMORY] button during loop
playback. The stored loop points are shown on the playing address
display.
Calling out stored cue or loop points
1 Connect a storage device (SD, USB) to this unit.
2 Load the track whose cue or loop points you want to
call out.
Stored cue and loop points are indicated [b] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or
[CUE/LOOP CALL d(LOOP 2X)] button.
Press [CUE/LOOP CALLc(LOOP 1/2X)] to call out a point before the cur-
rently playing position, [CUE/LOOP CALLd(LOOP 2X)] to call out a point
after the currently playing position.
The track cues to the called out point and pauses.
! When multiple points are stored, a different point is called out
each time the button is pressed.
! Loops set as active loops can also be called out as stored loops.
4 Press the [PLAY/PAUSE f] button.
Normal or loop playback starts from the point that was called out.
Deleting stored cue or loop points
Deleting points individually
1 Connect a storage device (SD, USB) to this unit.
2 Load the track containing the cue point or loop points
you want to delete.
Stored cue and loop points are indicated [b] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or
[CUE/LOOP CALL d(LOOP 2X)] button to call out the
point to be deleted.
The track cues to the called out point and pauses.
! When multiple points are stored, a different point is called out each
time the button is pressed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CDJ-2000NXS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CDJ-2000NXS in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer CDJ-2000NXS

Pioneer CDJ-2000NXS Quick start guide - English - 116 pages

Pioneer CDJ-2000NXS Installation Guide - English - 28 pages

Pioneer CDJ-2000NXS Quick start guide - German - 116 pages

Pioneer CDJ-2000NXS User Manual - German - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Dutch - 116 pages

Pioneer CDJ-2000NXS User Manual - Dutch - 49 pages

Pioneer CDJ-2000NXS Quick start guide - French - 116 pages

Pioneer CDJ-2000NXS User Manual - French - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Italian - 116 pages

Pioneer CDJ-2000NXS User Manual - Italian - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Portuguese - 116 pages

Pioneer CDJ-2000NXS User Manual - Portuguese - 49 pages

Pioneer CDJ-2000NXS Quick start guide - Spanish - 116 pages

Pioneer CDJ-2000NXS User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info